WIN7 Ultimate system prompts unidentified network without Internet access How to solve

In the win7 Ultimate system, after the broadband connection is successful, the local connection icon will also be in a successful connection state. Recently, users have used the win7 Ultimate system for local connection and then prompted unrecognized network without Internet access (as shown in the figure). How can the network not be connected, and troubleshooting the system can not solve such problems, http://www.windows7en.com/sdjswin7/So what is the cause of the unrecognized network connection on the local connection?

WIN7 Ultimate system prompts the unrecognized network. There are several services that are set to Manual or disabled. Among them: IPHELPer, NetworkConnections, RemoteAccessConnectionManager, these services can not be disabled, you must set the automatic start.
WIN7 Ultimate System Prompt Unrecognized Network No Internet Access Solution:
1, open the local connection settings, in addition to the IPv4 protocol, your own third-party firewall protocol (if you have a third-party firewall installed) ), there are QoS protocols (it is not recommended to tick, because some people do not feel that the network speed is fast), all other protocols of Win7 system do not check, cancel. After that, point IPv4, select properties, configure IP address: 192.168.1.2, subnet mask: 255.255.255.0, gateway: 192.168.1.1, DNS, different for everyone, the most direct way to view: after networking, right click on broadband Connect, select the status, and then click on the details, inside you can see IPv4DNS (dial-up users, IP address is randomly assigned, but this DNS is fixed), there are two, copy it, fill it out to the local connection http: //www.windows7en.com/ylmfwin7/here, the first one fills in 192.168.1.1. OK, the local connection ends here, click OK.
2, broadband connection, properties, network, only hook IPv4 protocol, other cancellation.
3, open IE, to the internet option, connect that item, LAN settings, click in, then cancel the auto detection setting option, OK, all settings are completed here.
4, and finally go back to the "Network and Sharing Center", right click on the icon of the local connection, click on the network in the pop-up window, then click on the merge network below, you will find "unrecognized network" Missed, the problem is solved.
Unidentified network is also a common fault. If this happens, the network will not work properly. If the user also encounters the same problem, then try the solution in the tutorial.
The article is from http://www.windows7en.com/Win7/list_1016_2.html