Apple laptop installed win7 graphic tutorial:
Preparation:
First prepare a U disk, u disk boot disk production tools (small editor here is U master, other operations The method is basically the same), there is a GHOST version of the Win7 system, we do not provide downloads, you can search on the Internet.
Apple notebook installed Win7 steps:
1. Use U master U disk boot disk production tool to make U disk into a boot U disk, no classmates, you can take a look at the following tutorial:
2. U disk plugged in the computer, restart the computer, because the Apple notebook does not have Bios settings, want to use U disk boot usually insert U disk, long press the "optin key" when the computer starts, it will enter a boot boot option interface, as shown: Br>
3. Use the arrow keys to select the right side of the "U disk boot", press the Enter key to enter, as shown in the figure:
4. Plug the U disk into the computer, start the computer from the U disk , enter the U disk menu selection interface, you can choose the corresponding option according to your needs, here select [1].
5. After entering the PE, double-click the desktop “DiskGenius” icon to pop up an interface (the next step is to delete all the partitions, so be sure to back up the data before this) As shown in the figure:
6. In the pop-up window, you will find the "delete partition" icon in the toolbar is gray, then select a hard disk partition and then you will see “delete partition” The icon becomes brighter and then clicks; in this way, all partitions are deleted in turn, as shown in the figure, the <quo;delete icon” will be grayed out again.
7. After deleting all partitions, click “Save Changes” icon, a window will pop up Click “Yes>; Figure:
8. Then click on the interface & ldquo menu bar; hard & rdquo ;, & ldquo selection; conversion to MBR partition table format type & rdquo ;, a screen will pop up, click OK, as shown:
9. Next click the interface In the toolbar, “Quick Partition” will pop up a quick partition window. In the window, we can set the number of partitions and the partition size. After setting these settings, click the “OK” button below.
10. After the partition is completed, click ““Hard Disk” in the interface menu bar, select “Rebuild Master Boot Record (MBR)”, an interface will pop up, click OK, as shown in the figure: br>
11. Double click the & ldquo; U master key to restore a backup system & rdquo; tools, click the & ldquo; View & rdquo ;, find just ready .gho file, as shown:
12. After selecting the gho file, select the system installation directory (remember to select the system disk here), click “Start”, as shown in the figure:
13. In the prompt box, click &ldquo ; is & rdquo; install button, the system will automatically run the next, as shown:
14.ghost after the system is installed, it will pop up & ldquo; reduction success & rdquo; window will prompt the computer 15 Automatically restart after seconds. 15. Wait for the computer to restart, and then complete the subsequent system installation.
The above is the Apple notebook installed win7 tutorial, only a few steps can be completed. But Xiao Bian still has to say that since Apple's notebook is used, it is still trying to use Apple's Mac system. Apple's hardware and software are designed for Mac system, and Mac can be used for maximum performance. Although Apple notebooks and ordinary notebook hardware are no different, can also install Windows, but after all, the original Mac system is the most suitable.