The method of opening the ahci mode in the Windows 7 system under the Thinkpad series

First, the benefits of turning on the hard disk AHCI mode are:
1. It can reduce the temperature of the hard disk and the noise when reading the disk.
2. Hard disk open AHCI mode can greatly shorten the useless seek times of the hard disk and shorten the data search time, so that the disk under multitasking can be used efficiently. It greatly improves the efficiency of frequently reading and writing hard disk programs, especially when running large games or software.
3. Support hot swap eSATA hard drive.
4. Extend the life of the hard drive.
Secondly, I have already installed the Win7 system and want to open the hard disk AHCI mode:
First step: download the attachment and install it under C:Drivers. After the installation, the directory structure is C:DriversWINIMSM, open C: In the DRIVERSWINIMSMPREPARE directory, double-click install.cmd and restart the computer.
Step 2: F1 enters the BIOS, change the option to AHCI in Config>Select Serial ATA (SATA), press F10 to save and select Yes to restart. Computer;
Step 3: After restarting the computer, you will enter the Win7 system. Right click on the Texas Instruments PCI-1510 CardBus Controller under the PCMCIA adapter in the Device Manager to select the update driver, select <Browse the computer to find The driver software >, and specify to the C: DRIVERSWINIMSM directory search installation.
Step 4: AHCI mode is turned on after restarting the computer.
At the end, when installing the system, the method of turning on the hard disk AHCI mode:
Firstly, the BIOS will open the AHCI function in the motherboard, that is, adjust the hard disk mode from the IDE to AHCI. Then install the system, and finally install the SATA AHCI driver. That's it. Oh, it’s simple!