WIN7 system boot animation is missing the method of recovery

As shown in the following figure, the boot system is no problem, it is not good on this interface.

Win7 system boot no animation reason analysis

WIN7 system resolution is too low, when the WIN7 system resolution setting is lower than 1024x768, the boot animation will not be displayed. The CPU is too bad, the computer configuration is too low, the CPU is too bad, and it is not suitable for installing the WIN7 system. WIN7 system language setting error You can find your own solution based on the above reasons.

Win7 system boot no animation solution /step

This article does not say the cause of the CPU is too bad. Just say setting the resolution and setting the system language. Step 1: First set the WIN7 system resolution, right click on the WIN7 system desktop, select “ resolution & rdquo;. Computer Mutual Network Note: In addition to direct adjustment directly on the Windows system desktop, you can also directly open the WIN7 Control Panel >> Appearance and Personalization>>Display>> Screen Resolution. Step 2: As shown below, in the “Change the appearance of the display” window, find the drop-down menu behind “Resolution (R)” and click to drag directly to the resolution you adjusted. Just fine. Computer Mutual Note: The resolution must be greater than 1024x768. For example, as shown in the figure below, all resolutions except 1024x768 can be adjusted. Step 3: After completing the above steps, if it is caused by the resolution, then try to restart directly. If the resolution is already greater than 1024x768, then the system language setting may be wrong. Step 4: Click on the “command prompt> in the Start menu and right click on the item to select “Run as administrator”. Computer mutual help network Note: If the current system login name is "Administrator", then you can click the command symbol directly. Another way to open it is to hold down the start key + R key in the keyboard. In the "Run" window that opens, type "CMD" and confirm that it can be opened. Step 5: In the Command Prompt window, type “bcdedit” and press the Enter key on your keyboard to confirm. If both of the following figures are "zh-cn", then it is normal. Step 6: If the two are different, you need to rewrite the changes. Also enter “bcdedit /set {current} locale zh-CN” at the command prompt and confirm. Note: No “”. Step 7: After the operation is successful, restart the computer. Generally speaking, after restarting, the boot animation of Windows7 system is normal. If it is not normal, then the CPU may be too bad.