How to open the management page of Win7 router

1. First check if the IE proxy is set, the specific method: first open IE browser, click & ldquo; Tools & rdquo; select & ldquo; Internet Options - Connect & mdash; & mdash; & ldquo ; LAN settings & rdquo;, then determine the "proxy server" /"Use a proxy server for the LAN" option is not checked, if it is checked, uncheck it.

2. If you can log in normally, if you can't log in now, then you can't rule out the attack caused by someone else's modified router configuration or the default 80 port. Solution: Restart or reset the router. Modify the management port, user name, password, etc. of the router.

3. If the user has modified the management port of the router, then the next time you log in, you need to log in as http://LAN port IP:XX, XX is the new port number, such as :http://192.168.1.1:8080;

4. If you can't log in after resetting or you can log in at the beginning, but you can't log in after a while, then it is likely to be ARP spoofing. The solution is to find the source of the spoof, kill the virus or isolate it.

5. If this is the first time you use a router, you should first confirm the following two points:

1 Check if the network cable is connected to the correct port (LAN port). Then, the corresponding NIC light indicator and the corresponding LAN port light of the router are normal.

2 Make sure that the IP of the computer is on the same network segment as the LAN port of the router. For example, when the router management address is 192.168.1.1 and the subnet mask is 255.255.255.0, the IP address of the computer should also be set to:

192.168.1.X (X is between 2-254), As shown below.

Tips: After the above settings, you can open the Win7 system router management interface. If you still have not solved the login problem of the router, please restore the router to the factory settings.