Fix 0xc0000098 error code when Win7 system starts up

There are many kinds of Win7 system startup failures. Usually there are certain fault codes. We can find the solution according to the fault code. The 0xc0000098 error code when booting is also a common boot failure, which can not be repaired, and the security mode cannot be entered. In fact, the BCD file that the win7 system starts to boot is damaged. As long as we repair the file, the fault can be solved. Of course, if you feel that reloading is more convenient, you can reinstall the system to solve this problem. It is recommended to reinstall the system Win764 Ultimate

If you fix the BCD file to solve the 0xc0000098 error?

1, find a win7 system installation disk, boot after the CD-ROM;

2, choose to repair the computer, and then open the command prompt;

3, in the command prompt in turn The following command: (Enter one line at a time)

c:

cd boot

attrib bcd -s -h -r

ren c:bootbcd bcd .old

bootrec /rebuildbcd

In addition, friends who have a USB flash drive can also use the USB flash drive to enter the PE system, and then use the boot repair tool in WINPE to repair the BCD file, as follows: :

1. The U disk PE system will be prepared in advance. Insert the USB flash drive into the computer, then shut down

2. Boot into the BIOS interface, set the USB flash drive to boot first. After entering the PE, select WINPE03 version, enter

3. After entering the PE system desktop , open the windows boot boot repair tool.

The above is to repair the WIN0 boot 0xc0000098 error code all the contents of the method, I hope to be helpful to everyone.