Win7 computer blue screen prompt error code 0x00000019 how to solve?

I believe everyone is familiar with the blue screen of the computer, because everyone has encountered it. The blue screen problem is one of the more common faults of the computer. This does not have users of the Win7 system. When using the computer, a blue screen appears, indicating that the error code is 0x00000019. How to do? How do you solve this problem? Now Xiaobian will talk to you about the Win7 computer blue screen prompt error code 0x00000019 solution.

following steps:

is the first portion of the error stop code, i.e. stop 0x00000019, for identifying the type of error has occurred. The second part of the error is a set of four numbers enclosed in parentheses that represent the parameters defined by the random developer. The third part of the error is the name of the error, where the first part of English is the operational information recommended by the user. Therefore, when everyone encounters the blue screen, don't rush to restart, write down the stop code (ie stop 0x00000019). When encountering a blue screen, rebooting is a common method, but it does not necessarily solve the problem.

The most common solution is as follows:

(1) Check if the new hardware is plugged in. This is a problem that many people will ignore, but it often causes inexplicable failures. (such as a newly replaced memory module)

(2) Check for new drivers or services. If a new driver or service is installed with a blue screen, you can uninstall or disable it in Safe Mode.

(3) Check the newly installed software. Sometimes some firewall software can cause this kind of failure.

(4) Check the virus.

(5) Turn off the memory options in the BIOS, such as caching and mapping.

(6) Use “ Last correct configuration &

(7) Check the disk for damage.

Specific reference operation method:

1, is to enter MSONCIFG, and then enter the service to close the corresponding service.

2, is to enter the registry regedit, then search for npkcrypt, and then delete all found.

3, only retain the monitor cable, the power cord is turned on, the blue screen does not appear after booting, then it can be determined that one of the devices caused the system blue screen; if through the exclusion method, it is found that a blue screen appears when connecting a certain hardware Finally, it is solved by replacing the hardware.

Note: This type of failure may occur when the USB port on the USB device or the host is unstable. Be sure to check this part.

On the Win7 computer blue screen prompt error code 0x00000019 solution will be introduced to everyone here; in fact, do not be afraid to encounter the blue screen, this is a very normal thing, as long as the blue screen can be found Solve it.