How to set up Win7 gateway? How to set up a gateway

Everyone knows that a gateway is a connected device between networks. It can translate different communication protocols and enable two networks of different protocols to communicate with each other. The gateway used by our computer host is generally the default gateway, so how to set the default gateway in Win7 system? Below, let's talk about the way Win7 sets up the gateway.

The specific steps are as follows:

1. Open “Control Panel“, set the "View Mode" to "Small Icons", then find and click "Internet Options" ”.

2. Click on “Change Adapter Settings” in the window that opens.

3, in the window that opens, right-click "local connection", select "ldquo; attribute" in the pop-up menu.

4. In the "Local Connection Properties" window that opens, find "Internet Protocol Version (TCP/IPv4)" and double-click to open it.

5, in the "Internet Protocol Version (TCP /IPv4) Properties" window, check "Use the following IP address", then enter the IP address and subnet mask, in the default Enter the default gateway address in the gateway input box, and finally click “OK” to complete the settings.

6. Test the gateway. Open the “Run” dialog box and enter the command “CMD” to open the MSDOS window. Then enter the command “ld 192.168.1.1 -t” in the window. If the information shows that the data is successfully received, the default gateway configuration is successful.

The method of setting up the gateway for Win7 will be introduced to you in detail. A gateway is a network that connects to another network's "gateway". If you do not know how to set up the gateway user, you can follow the above steps to set up, I hope to help everyone here!