Win7 BIOS reset factory settings two ways

A user enters the computer's BIOS and makes some settings for his work, but an error occurred because of improper operation. The best way we can think of at this point is to restore the BIOS to the original factory settings. The following small series will take the Win7 system as an example to introduce to you two ways to restore the factory settings of the BIOS.

Method 1、

1. Remove the button battery on the motherboard, keep 15 or more banknotes after removing it, and then install it, so that you can eliminate the BIOS information and then restore the factory settings. It is.

2, of course, some motherboards are also equipped with "hard jumper", just need to use the jumper cap to follow the prompts, "ld"; 2 & rdquo; and “ 3 & rdquo; pin short connection, this also Can eliminate the BIOS information function.

Method 2,

1. At the time of booting, when the message appears at the bottom of the screen, such as "Press DEl Enter Bios", "Press F1 to Run Setup", etc. Press the DELETE button to enter the BIOS program interface.

2. After entering the BIOS interface, move the cursor to the “Load Optimized Default” item and press Enter.

3, then the pop-up window, select & ldquo; yes & rdquo; and press the Enter key, you can achieve restore factory settings, and press F10 to save what you can.

These are the small series have set out the method to restore the factory settings of BIOS, the same problems of Friends of the faithful can arbitrarily select a method to resolve. If friends and friends have other simpler methods, welcome to interact with Xiaobian.