After Win7 starts blue screen error code 0x00000f4 solution

encountered blue screen failure, very often used well before, but also shut down the computer normally. But after starting the computer some time, the system is inexplicably blue screen. Some users have encountered this situation when using Win7 system, display blue screen code 0x00000F4, what should I do?

Analysis of the cause: Blue screen code 0x00000F4 may mean that the hardware has failed, which may be caused by a faulty hard disk or memory. However, it cannot be absolutely certain, because there are a few cases that are caused by other reasons. It is recommended to eliminate and solve the problem through the following steps.

It is recommended that you exclude the steps: (soft and hard steps first)

1. If running the software causes an error, it is recommended to reinstall the software to confirm the problem. If the software is not compatible with the system, then Need to uninstall and replace the operation.

2Whether there are other software running at the same time causing conflicts or the host configuration memory is too small, causing memory overflow or exhaustion (try to increase the memory validation problem).

3. Check whether the driver or BIOS has been reinstalled or upgraded recently. It is likely that the driver is incompatible. Uninstall the original driver (especially the graphics card and motherboard driver).

4. If you exclude the first three points, it is likely to be a hardware problem. To determine if it is a hardware failure, it is recommended to format the hard disk, reinstall the system, see if it is normal, eliminate viruses and system related faults.

5. Hardware problems, mainly check the hard disk and memory, check whether the memory metal strip is oxidized, if more than two memory is installed, remove one or change the memory slot. Other motherboards, power supplies, heat sinks, etc. should also be checked.

The above steps can explain the reason why the blue screen code 0x00000f4 appears after Win7 startup in more detail. Although there are many steps, it can be more thoroughly checked. If the problem is still not resolved, then consider hardware compatibility issues or reinstall the system directly.