Win7 blue screen prompt error code 0x00000019 how to solve?

Win7 computer blue screen prompts error code 0x00000019 solution.

The steps are as follows:

The first part of the error is the stop code, stop 0x00000019, which identifies the type of error that has occurred. The second part of the error is a set of four numbers enclosed in parentheses that represent the parameters defined by the random developer. The third part of the error is the name of the error, where the first part of English is the operational information recommended by the user. Therefore, when everyone encounters the blue screen, don't rush to restart, write down the stop code (ie stop 0x00000019). When encountering a blue screen, rebooting is a common method, but it does not necessarily solve the problem.

The most common solution is as follows:

(1) Check if the new hardware is plugged in. This is a problem that many people will ignore, but it often causes inexplicable failures. (such as a newly replaced memory module)

(2) Check for new drivers or services. If a new driver or service is installed with a blue screen, you can uninstall or disable it in Safe Mode.

(3) Check the newly installed software. Sometimes some firewall software can cause this kind of failure.

(4) Check the virus.

(5) Turn off the memory options in the BIOS, such as caching and mapping.

(6) Use “ Last correct configuration &

(7) Check the disk for damage.

Specific reference operation method:

1, is to enter MSONCIFG, and then enter the service to close the corresponding service.

2, is to enter the registry regedit, then search for npkcrypt, and then delete all found.

3, only retain the monitor cable, the power cord is turned on, the blue screen does not appear after booting, then it can be determined that one of the devices caused the system blue screen; if through the exclusion method, it is found that a blue screen appears when connecting a certain hardware Finally, it is solved by replacing the hardware.

Note: This type of failure may occur when the USB port on the USB device or the host is unstable. Be sure to check this part.