How to do when the win7 self-test is stuck

After turning on the computer, the system will automatically run the firmware of the motherboard BIOS chip, called post-power self test (power on self test)

Under normal circumstances, after the single self-test is completed, the system will look for the operating system from the hard disk, CD or network server to start, the system will control the computer.

In safe mode, right click on the wrong disk partition and select [Properties] - [Tools (tab)] - [Check Error (Option)] - [Start Check], check [Automatically Repair the file] and [Scan and try to recover the bad sector], click [Start] after the setting is completed. The system will divide the program into five stages to complete. The computer will restart after the check is completed, which will solve the problem.

Another solution:

Click [Start] and enter the [chkdsk x: /f] command in [Run] to fix the faulty partition. x represents the wrong drive letter. Once an error message is encountered, chkdsk will stop displaying the message. If chkdsk completes the task, the disk status information is displayed. If chkdsk does not complete the task, it is impossible to open any files.

Generally speaking, computer hard drives are caused by bad sectors.

Speed ​​up the boot time by:

1. Reduce the boot process and speed up the system startup. Click [Menu] - enter [msconfig] in [Run] to open the page, click [Start] on this page, it is recommended that you only leave: efw, show, rav tmer, rav mom three Rising antivirus software, always do Good monitoring of the system, ctfmom.exe is the input method display, it is best not to delete these three items, otherwise there will be trouble.

2. Click [Start Menu] - [So Program] - find [Start] and click Open to delete all the contents. Some are built into the system, and it will automatically start even if the settings are not activated.

3, click [Start Menu] - [Control Panel] - [Performance and Maintenance] - [Power Options], click the [Sleep] tab. Be sure to select [Enable Hibernate check box] and click OK. If you want to turn off the computer, select [Sleep]. If [Standby] appears in the shutdown dialog box, press [Shift] to convert it to [Sleep] status. The next time you turn it on, the computer will automatically and quickly return to the last shutdown state.

4. If your computer system is stable and rarely malfunctions, you can increase the boot speed by:

Click [Start Menu] - [Control Panel] - [Performance and Maintenance 】-[System], open the [System Features]-[Advanced] tab, click the [Startup and Recovery] button, open the [Startup and Recovery] dialog box, and [System Failure] [Write Time to System] Check the two options of Log] and [Send Management Alarm], then open the drop-down list of [Write Debug Information], select [None], and click [OK].

5, by rolling down the number of scroll bars. Click [Start Menu] - enter [regedit] in [Run], and find the branch of [jkey-local-machine-system/current contralset/control/sessin manager/memory management/preech paramentrs] in the pop-up window. Find the child of [enableprefecher] in the right window and set its value to [1]. Then right click [My Computer] - [Properties] - [Hardware] - [Device Manager] - expand [ide ata /atapz controller], then double-click [secondary channel ide], select [ in the pop-up dialog box Advanced], in the middle of [Device], the original [Automatic Detection] is changed to [None]. With the above settings, after restarting the computer, the scroll bar is reduced to 3 times (ten times before it is set).

6. Click [Start Menu] - enter [regedit] in [Run], open [hkey-current-user/controlpaner;sesktop/] on the pop-up page, find [hungapptineout], and put it Change the value to [5000] and change the value of [waittojillapptimeout] to [4000]. Open [hkey-local-mach-system/currnentcontralset/control], find [waittokillservicetimeout] and change its key value to [4000].