Acer ACER4752Gwin7 system notebook detailed steps to replace the memory module

The detailed steps for the Acer ACER4752Gwin7 system notebook to correctly replace the memory module. The size of the notebook memory has a lot to do with the speed of the system. If the system is big enough, it will run much faster. Some users want to replace the memory module of the Acer ACER4752G notebook win7 system, but have no experience, do not know how to correctly replace the memory module, in order to help users solve this problem, Xiaobian research to sort out the detailed steps of replacing the memory module, the users in need Let's take a look at how the Acer ACER4752Gwin7 system notebook is properly replaced.

The specific method is as follows:

1. Turn the notebook to the back first. On the left is the place where the memory and hard disk are replaced on the right side of the notebook. The right side needs to be opened with a Phillips screwdriver.

2, after removing the three screws on the cover, the left side is the hard disk of the notebook, the middle is the network card, the right side is the memory;

3, when you replace the memory, you see As shown in the figure, the hard disk is stuck with the buckle. You need to open the left and right side buckles, then the hard disk will be lifted up, and then the memory will be unplugged.

4. After removing, you can see the following. There is also a memory stick, which can be removed in the same way. After removing it, you can see the memory interface as shown in Figure 3.

5, acer4752g provides two memory interfaces, the user You can replace it with the above method according to your own needs and add a memory stick.

The detailed steps of the Acer ACER4752Gwin7 system notebook to correctly replace the memory module are shared here. If you need to replace the memory module for your notebook, you can refer to this tutorial.