How to use the 360 ​​network first-aid box to solve the network failure problem in win7 system

How does the win7 system use the 360-breaking first-aid kit to solve network problems? During the operation of the win7 operating system, it is inevitable that some network failures will not be able to access the Internet. There are many reasons for the network failure, such as the network cable is not plugged in, the network driver is abnormal, the network card is disabled, the network service is not enabled, and so on. At this time, you can use the 360 ​​Broken Network First Aid Kit to solve network problems. Sometimes you can solve network problems with tools. So this tutorial shares the win7 system using 360 off-network first aid kit to solve the network failure problem.

Solution:

1. First, you must have 360 ​​Security Guard installed before your computer;

2. Open 360 Security Guard, in the lower right corner of the main interface. You can find the "360 first-aid first-aid box", click to open it to use;

3, 360 network first-aid box if not found in the above picture, please click on the right side "more" Then, in the open page, search for “Diagnostic First Aid Box” and click “Open”;

4, then click on the full diagnosis, wait for the test to complete, you can check whether the network configuration exists. Question, if there is a problem, click “immediately repair”, generally solve the common online problem;

5, fix it immediately.

The above is the method of using the 360 ​​network first-aid box to solve the network failure problem in the win7 system. If you are a computer white problem, you can refer to this tutorial to solve the problem.