Win7 boot password forgot how to use U disk to change the password?

Many friends' computers will set a power-on password to enhance computer security. But sometimes it's easier to forget the power-on password when you don't use the computer for a long time and suddenly use it again. What should I do if I forget the computer power-on password? At present, most users know that the computer master can clear the password or change the password through the USB flash drive, but I don’t know how to operate it. Today, Xiaobian will teach you how to modify the computer power-on password through the USB flash drive. I hope to be helpful.

To use the USB flash drive to clear or modify the computer's power-on password, you first need to prepare a USB flash drive that has been successfully created into a USB flash drive. On how to make the U disk into a boot U disk, I won't repeat it here. I have shared a lot of methods for you, including using U speed, U master, Chinese cabbage, etc.

The computer power-on password forgot how to use the U disk to modify the login password. The steps are as follows:

1. Insert the USB flash drive into the computer, then restart the computer, and then boot the brand LOGO logo. Immediately press the system startup shortcut key, call out the startup item window, and then choose to boot the computer from the boot U disk, as shown.

Note: Different computer settings are different from U disk boot method, generally can be selected through bios settings or directly through shortcut keys. The picture above is a friend who does not know what shortcut keys are used by his computer through the shortcut keys. Please read the following tutorial: [How to make a u disk boot u speed one-click production U disk boot graphic tutorial].

2, the small version of the U disk used before the U speed tool manufacturing start U disk, after entering the U disk menu interface, first use the up and down arrow keys on the keyboard to select the third item [run U speed Win03PE enhanced version], then press the Enter key to confirm the entry, as shown.

3. After entering the U-speed PE desktop system, click the “Start” button in the lower left corner of the desktop, and then click “Program-Password Management-Windows Password Cleaner”, as shown in the figure. .

4, after opening the Windows Password Cleaner tool, click the "Open" button, then find the computer user who forgot the password in the list of users below, and then click the "Change Password" button After that, you can modify the power-on password here, as shown in the figure.

5, in the pop-up change password window, after we enter the new password that we believe twice, click the "OK" button to save the operation, as shown in the figure.

6, click on the last “ save changes & rdquo; on it, as shown.

After restarting, restart the computer, then unplug the USB flash drive, re-enter the computer login interface, and then log in with the new password to successfully enter the system. How about using a USB flash drive to solve the problem of forgetting the power-on password? If the computer can't enter the system, what if the USB flash drive is not made into a bootable USB flash drive? This is not difficult. Take a USB flash drive and go to friends and family. On the computer, make the U disk into a boot U disk, and then come back to use it.