How to set the Win7 computer shutdown button

  

How to set the Win7 computer shutdown button? Some users, after the shutdown, the keyboard or mouse light is still in the steady state, then how to set the computer shutdown button? Come and see!

If the shutdown is not normal, we must first check the computer Shutdown settings:

The first step is to open the desktop, right-click on the empty space in the taskbar, and select Properties.

In the second step, select the power button operation in the start menu, then click the drop-down menu on the right, and the selection menu will appear. From this menu, we can check the setting of the power operation.

Or you can view it by [Start Menu], then select [Power Options] in [Control Panel], and then select [Power Button].

The third step, after the shutdown, the keyboard indicator and the mouse light are not extinguished, because the power operation setting becomes the sleep mode. As the name suggests, the sleep mode is that the computer does not completely shut down, but enters the minimum power, only Maintain a rest mode for system operation. For example, if we have something to leave the computer temporarily, but the computer is still downloading, you can use the sleep mode.

Next, to understand the other modes of computer shutdown, there is a mode similar to sleep mode, which is sleep mode. The difference between them is that the sleep mode is when the computer is powered on, and the sleep is in a power-off state. But regardless of the mode, the working state is saved to the memory.

Because they all keep working through memory, they will take up memory. In the hard disk, usually a space is defined in the C drive to become the storage space, and then the hiberfil.sys file (number of G) is formed. .

Because most of the C drives are system disks, some friends will worry that the sleep mode takes up too much memory, and the sleep mode is rarely used. You can remove the sleep mode and then delete the sleep mode. Files, saving space on the system disk. The following is a schematic diagram of the operation of the XP system, open the Start menu, then select the Control Panel, select the power option, uncheck Enable hibernation, and then confirm the operation.

Delete the hibernation file as follows, enter: powercfg -h off in the run, press Enter to perform the operation, then delete the hiberfil.sys file in the C drive directory to save space.

Another mode is the logout mode. There are often multiple accounts in an operating system. The logout mode is to log out of the current account and then select another account to log in to the system. If the system is updating system driver operations and the like before logging out of the account, logging out of the system does not take effect for the new settings. This situation requires a reboot or a real shutdown to take effect.

Or you can choose the lock mode. For example, if you just leave the computer in a short time, you can use Windows+L to lock the computer through the shortcut key. After you return, you only need to press Enter to enter the current working state.

The above is the Win7 computer shutdown button settings teaching, everyone now has a new understanding of the shutdown knowledge, I hope to help some of the shutdown problems on the computer.

Copyright © Windows knowledge All Rights Reserved