Old peach U disk boot disk making tool V2013 (UD + ISO super version) - install the original Win7 or W

Install the original Win7 two types of methods Note: The following installation methods except the method 1 in the second category can be applied to all methods The first type of 64-bit win7 or win8 system installation: native U disk installation, the U disk boot menu created by this tool contains Windows 7 operating system installation function, use this function to transplant Win7 system to your U disk. This function does not need to enter the PE without a virtual optical drive, is not limited by the FAT32 and NTFS file system, does not need to format the U disk again, the speed is much faster than the CD installation, is a pure U disk installation. Since the disk order has been exchanged in the startup command, there will be no case where the first disk is a USB disk during the installation (the real machine has been tested), please feel free to use it. Reminder: Do not test this installation method under the virtual machine, the virtual machine test will generally fail. Specific steps: 1, first use the old peach U disk boot disk production tool to make the U disk boot. 2. Find the iso image of the Windows 7 system, open the iso image of Win7 with UltraISO or WinRAR, and then extract/unzip all the files to the root directory of your U disk. 3. Finally, find the file named bootmgr in your U disk and rename bootmgr to win7mgr. 4. Start the computer with a USB flash drive, select menu 11, and then select menu 2 to directly install the Win7 operating system. The following steps are not much different from installing with a CD. When the installation process is automatically restarted, the U disk can be removed and the installation can continue. The second method: enter the PE using a virtual optical drive or hard disk installation tool for installation steps: Enter the boot menu 11, then select menu 1, enter the PE. Method 1. Use the virtual CD-ROM drive to load the ISO image of the win7 system, then open the virtual CD-ROM drive and double-click setup.exe to install it. (Old peaches use the original method to solve the problem that the original Win7 installed under PE can not create the system partition) Method 2, extract the install.wim from the Win7 installation disk sources directory into the U disk or hard disk, and then start the U disk into PE, use the NT6 installation tool to find the install.wim extracted from the ISO for installation. The following three Win7 installation tools are available! Method 3, similar to Method 2, directly load the Win7 ISO installation file in the PE using a virtual optical drive, and then use the NT6 installation tool and other software to install. Or Note: All the above methods except the method 1 in the second category can be applied to the installation of 64-bit win7 or win8 systems.