Hp1008win7 driver problem

        I encountered a very speechless driver problem today. On the HP official website, I downloaded the For 64-bit Win7 P1008 driver (ljP1000_P1500-HB-pnp-win64-en, HP LaserJet Hostbased Plug and Play Basic Driver) installation, and the result was wrong when installing to Copy files to hard disk. The pop-up window "printer software installer has stopped working.". Whether you plug in the printer or unplug it, it's the same mistake. Considering that it is possible that HP's driver has problems with 64-bit support, it is specifically looking for another 32-bit Win7 machine to install. The result is still wrong. Later, I made some time to determine the cause of the error. When installing the driver, a directory called HP LaserJet P1000_P1500 Series will be created under C:\\Program Files\\HP. Then SB is on the SB, the installer will continue to copy a copy of HP's directory in this directory … … the result of the loop, and hung … … 1, extract the driver to a directory, such as D:\\ljP1000_P1500- HB-pnp-win64-en. 2. Continue to the files in HP1006drv64.cab and HP1006enww64.cab in the same directory. 3. Plug in the printer. The printer should be found, but the installation is not supported. 4, enter the device manager (start, device and print, right button, device manager) 5, find the printer driver with question mark, choose to update the driver software, browse the computer to find the driver software. 6. Select the directory that you extracted. 7, should be installed … …