Uncovering the difference between 54M and static 108M

What is dynamic 108M? Why is my network card configuration software showing 54M? What is the difference between static and 108M? With these questions, we look at the following. The purpose

dynamic 108M features designed for compatibility common 802.11B and 802.11G products used together to meet the network 11M, 54M and 108M simultaneously access the working principle of dynamic 108M mode is 54M Switching with the 108M mode, but this switching is internal and cannot be performed externally. On the NIC configuration software, the connection rate we see will always be 54M. In addition, if there are fixed 802.11B and 802.11G products in your environment, you can't switch to 108M mode. In this case, we recommend you use 54M mode.

If your environment is 108M card, but there may be a few cases of customers to carry a laptop (ordinary wireless LAN) need access to your corporate network, you can use dynamic 108M mode.

the other hand, is a permanent job in a static 108M 108M mode, only support 108M NIC mode can connect, while other common 802.11B and 802.11G products are unable to connect, but this mode the signal strength and The quality requirements are also relatively high.

Note: 108M Technology (SuperG) not IEEE standard techniques, different manufacturers of wireless products there may not be connected to the connector (not yet found), poor connection performance (signal not unstable), etc. Situation, so we recommend that you choose the same manufacturer's wireless network card, wireless routing and wireless AP.