How to set up the switch in the win8 system win8 system switch settings tutorial

win8 system how to set up the switch? This kind of small switch used in my home, only a few interfaces, home is enough, and other switch settings are the same, first look at the picture as shown below: the back is the slot of the network cable;

1, this is the side of the switch, usually the interface of the power line, of course, the different switches may have different positions, but generally on the side.

2, this is the front, mainly the indicator light of the switch, etc., here you can determine whether your network cable is connected successfully.

3, let's start setting up the switch. The power cable connection in the figure below is successful. After the power connection is successful, there will usually be a light in the pope and the front.

4. Next, we will connect the network cable. First, connect the external broadband network cable to one of the interfaces of the switch, and then connect the switch to your computer with the network cable. During the connection process, you can Look at the front indicator light, if it is flashing, the connection is successful.

5, parsing, we need to set up a host, the IP address is fixed, such as 192.168.0.1 as shown below

6, if your computer set the IP as above , then the IP of several other computers should also be set on the same network segment, that is to say set to 192.169.0.* (* indicates any number below 255.) After setting, we test whether it is successful or not. Run the input “cmd” Then PING command to see if the connection is successful

7, next, we will return to the host, which is 192.168.0.1 this computer, click on the network connection Broadband connection, right click --- attribute --- advanced. Then set up the shared network. After setting up, the broadband connection will display the words “shared”, as shown below. that's it.

The above is the tutorial for the win8 system switch set up by Pepsi.com.