The method of letting Win8's own system recovery function be associated with factory backup in hidden partitions

After some computers are modified with other versions of Windows 8, the system needs to be backed up again if the key recovery is not broken. If you directly back up, the reset and recovery functions under Windows system will not be used, as shown below: The method of letting Win8's own system recovery function be associated with the factory backup in the hidden partition requires diskpart before performing the re-backup of the factory image command. Hang on the hidden partition and perform a recovery mirror association. Operation steps: 1. Run CMD as administrator, run “ldstairs” in the command line. 2. Enter the following command in diskpart to select one-key recovery backup storage partition 1) list disk2) sel disk 0 Note: number is not Must be 0, according to the hard disk information displayed, please refer to the screenshot 3) list part4) sel part 9 Note: The number is not necessarily 9, according to the displayed partition information, please refer to screenshot 3. Continue in diskpart Enter the following command to assign a drive letter to the hidden partition and exit. Also use “detail part” first check the partition information, so as not to choose the wrong partition, this example assigns the drive letter O1)detail part2)assign letter=o3)exit 4. Enter “reagentc /setosimage /path O:\\OKRBackup\\Factory /Index 1”Recovery folder association. In this example, OKR8.0 is used as an example. PBR should change the folder directory. 5. After the operation is successful, enter OKR to back up the system. PBR recommends deleting Install.wim and then backing up the

note. : The image called by Windows 8/8.1 comes with the recovery function must be Install.wim, the name will be changed to os.okr after some desktop backup, please rename it to Install.wim try