How to install Win8 Anatomy of Win8 three major installation methods

is not a consumer preview version, release preview version, is the official version now, this time Win8 is really coming! One of the most initial problems is coming. How to install Win8? The official version of Win8 is currently available for download, but it is important to purchase the Win8 key. This is the point. Is the installation aspect of online installation or U disk installation or virtual CD-ROM installation? The following article with everyone to introduce the Win8 system installation method summary!

Win8 hard disk installation method: easy to use to operate

The easiest way to install Win8 is to decompress the installation, novice novice can also get it. It should be noted that there are two ways to install the hard disk. One is to guide the installation. This method has a certain failure rate. It is not recommended for everyone to use. The other is upgrade installation, which is suitable for ordinary netizens.

Upgrade Installation

This article upgrades Win7. According to the latest information, the original system minimum requirement is WinXP. Unzip the downloaded Win8 system iOS file in the root directory of the non-system disk, find the Sources folder in the root directory, and then locate Setup.exe (note that it is not Setup.exe in the root directory), click Setup.exe. The Win8 installation interface pops up.

In the middle of the interface, select “Get the latest update (recommended) (G)” option for the installer online, click “Next”, then enter the product key to activate Windows. After activation, check "& I will accept the license agreement", click “Next”, select "Upgrade: Install Windows and keep files, settings and applications", click “Next”, select &ldquo ; C drive & rdquo; can be installed. It should be noted that the disadvantage of this method is that if the original system is 32-bit, then the upgrade system can only be upgraded to 32-bit. If it is 64-bit Win8, the installation will fail!

Select Setup.exe Sources folder, rather than the root directory. For detailed methods, please read: How to upgrade Win8 Win8 pre-installed Win7 directly upgrade Win8 graphic tutorial.

Boot installation Win8

The principle of boot installation is the same as the upgrade installation. The difference is that the former boot record is the command completion, and the latter is the installer completion. In addition, the installation is difficult and different, the boot installation has a certain failure rate (caused by compatibility issues), so many experts are proud of boot installation, do not bother to upgrade the installation. The boot installation steps are as follows:

Download the hard disk installation tool NT6HDDInstaller and put it in the root directory (that is, the same directory as the Win8 system installation file). If the tool is placed in the wrong location, it will not be installed. Then run NT6HDDInstaller. If the original system is XP, select mode 1. If the original system is XPWin7, select formula 2.
The original system is Win7, so choose mode 2

After a few seconds of waiting time, the bootloader is installed. Restart the computer, we will find a new boot boot entry ——NT6HDDInstallermode2 in the boot manager, select it to see the Win8 installation interface.

Flash installation method: backup Win8 can be used anytime, anywhere

Dong master: For many masters, do not bother to use the hard disk installation method, they prefer the flash installation method, because the Win8 flash memory is made After that, the reinstallation system can be reused later, and it will not temporarily hold the Buddha's horn. Master Dong recommended using old peaches to make flash boot disks.

First download and unzip the old peach WinPe flash production tool (download address: laomaotao.net), then extract the downloaded Win8 system iOS file and copy all the files to the flash memory, then turn off the real-time monitoring of the security software. So as not to make the production fail. At this point, all the preparations are done.

Now, run the old peach (do not need to install), select "USB-HDD-FAT32" in the pop-up interface, and then click "One button to make a USB boot disk", and finally enter the flash to find the name. For the bootmgr file, rename bootmgr to win7mgr—— not win8mgr, don't correct it.

Last restart the computer and press the Del key to enter the CMOS. Set the flash memory to the first boot sequence. After saving, insert the flash memory and restart the computer to see the installation interface of the old peach. In the interface, select “ install the original Vista /Win7 /Win8 system & rdquo;, then select “ directly install Win7 & rdquo; you can see the Win8 installation interface.
Old peach installation Win8

Virtual CD-ROM installation method: only for installing dual system

Dong master: If you want to keep the current system and want to experience Win8, you need to use Dual system. Installing a dual system, the preferred virtual drive installation method, because it can be operated in the existing system, fewer steps, easier to operate.

First of all, we need to download and install a virtual CD-ROM software. This kind of software is similar, just choose one. Here, Master Dong chooses DaemonToolsLite. Next, we have to prepare a disk for Win8: the original system disk is in the C disk, then you can consider emptying the D disk. The preparations are all done, now you can install Win8.
Click the first button to load the ISO, then click the third button to run ISO

Run DaemonToolsLite, click the first button, select the downloaded system ISO file, and then click the Run button, the virtual drive The system ISO file is successfully loaded, and the subsequent operation is the same as the operation of the optical drive. Double-click the virtual CD-ROM drive, Win8 will run automatically. After the system scan, click “Accept", then click “Next”, and finally click “Install" to complete the Win8 installation, restart to see Win8.

After installing the dual system, there is a problem. I want to change the default boot order. For example, if I start XP by default, instead of Win8, what should I do? The operation is as follows: download and install Magic Cube
, run the Rubik's Cube, select the optimization master, click “system optimization”→“multiple system selection”, click modify, set XP as the first startup sequence Finally, save the settings and restart.

Extended reading: You need an account

Unlike other systems, you need a Live account to use Win8 completely. Log in to https://signup.msn.cn, register an account, and you can use Microsoft's Hotmail, SkyDrive and other services in the future. SkyDrive is a cloud service of Win8 system, which provides 25GB of cloud storage space after registration.
Register Live Account

In addition, every time Microsoft releases a new version of Windows operating system, there will be an OEM activation code that can be registered in batches on the Internet. This time, there may be different situations, from OEMs. Microsoft will be required to write a unique Windows 8 product key for each OEM machine to eliminate volume activation. Therefore, we will focus on how to activate Win8 in the future.

It is recommended that you use a USB flash drive to install Win8. It is more convenient to read: How to use the u disk to install win8 system to teach you to use U disk to install Win8