Win8 input method can not switch can not display the language bar

Windows 8 system input method switching method is quite different from Windows 7 system, and the various input methods for Windows 8 compatibility is not perfect, sometimes it can not be switched In the case of the input method, you can make adjustments in the control panel at this time, which can generally solve such problems. Operation steps: There are two kinds of situations that the commonly encountered input method cannot be switched: 1. The language bar cannot be displayed, and the shortcut key cannot be used to switch out, as shown below: Solution: You can redisplay by resetting the input method setting. The method is as follows: 1. Open the control panel: 2. Click ““change the input method”: 3. Click ““Advanced Settings” on the left side: 4. Will “Use the desktop language bar (when available)> Checked, if you do not check the following settings can also be displayed, but will be reduced to the tray bar; 5, click “ change the language bar hotkey & rdquo;: 6, see if set to “ hide & rdquo;, if not, Can be set to “Hide”, OK; then set to “Hang on the desktop“ or “ docked on the taskbar”; generally can display the input method normally. Second, the input method can not be switched: This situation is due to the Windows 8 system's Chinese input method switching hotkey changed to "Win+Space", use this hotkey to switch normally. If you can't switch, you need to see if you changed the hotkey settings. The specific viewing method is as follows: 1. Select ““Advanced Key Settings” in the “Text Service and Input Language” window, as shown below: 2. Click “Change” Key sequence …”, as shown below: 3. You can check whether it is the above setting. If it is the above setting but can't switch, you can change the setting first, then change it back. Generally, you can solve such problems.