Notebook win8 system is easy to use

                                                                                                                                                                                         

Notebook
windows
/' target='_blank'>win8
The system basically supports mainstream software and office software, just some small software Manufacturers and games have compatibility issues, and I believe that Microsoft will soon resolve compatibility. If you feel that the compatibility of windows
/' target='_blank'>win8
is a headache, you can install dual systems. (1, how to install dual system win2, win8 system installation win7) The following is a detailed analysis of the notebook
win8 system easy to use content.

First, download the system, and make the system to install the U disk

1, download the Windows8 installation image, choose to download the 32-bit or 64-bit system according to your needs

2 Burn the downloaded Win8 system ISO image to the U disk, make a U disk system installation tool

3, hold down the win key + R key to open the run, enter: diskmgmt.msc, then click OK to run the disk Management

Second, create VHD partition

VHD is a separate partition, we can think of VHD as a garbage bag on the trash can, when we don't want to use it, we can throw it, The trash can is still brand new. The advantage of using VHD to install the system is that it will not be confused with the previously installed system, and it is easy to restore to the initial state of

without occupying a new partition

1. In the disk management that appears, click the [Operation] button in the menu bar, then select [Create VHD]

2, then set the location and size of the VHD file. The size recommendation is not lower than 30 GB, the location must pay attention to the remaining space of the selected location must be greater than the size of the virtual hard disk you set, virtual hard The disk format selects a fixed size

3, then Windows will create a VHD. At this time, you can check the progress in the status bar in the MMC snap-in. The time is a bit long, wait patiently for a while
< Br>

4, after the VHD is created, you can find this new disk in the disk management console list. You must initialize the disk before using it, so right click on the leftmost position, the red frame position of the disk in the figure below, it And select initialization

5, the partition style is: MBR (master boot record), and then click OK

6, after that is to create a new partition, in this Right-click on the newly created VHD, and then select "New Simple Volume".

7. Assign a drive symbol to this disk (must be assigned, otherwise it cannot be used)

8, the default setting can be, the volume label can be set to "Windows 8"; for easy searching, then remember to check [Quick Format], then click Next to complete

9, now your VHD is created, and a real hard drive is the same, we will install Windows to In this partition

Third, the installation process please see: how to install win8 system

The above is the notebook win8 system easy to use all content, this article is only for reference help, not Make a comprehensive applicability guarantee. Know in advance when installed win8 system meets the system requirements for installation win8