How to open the hidden function of Windows 7: virtual WiFi and SoftAP, no routing from now on

The machine settings are as follows: 1. Run the command prompt as an administrator: "Start”---Enter in the search bar “cmd”----Right-click "Run as administrator" “ 2Enable And set the virtual WiFi network card: Run the command: netsh wlan set hostednetwork mode=allow ssid=wuminPC key=wuminWiFi (Note: the above command "ssid" after the red word for the network name, you can just name it, such as wuminPC can be changed to MyWiFi, etc. I like how to name it. "Key" The red word is the password. I can name it by myself. For example, wuminWiFi can be changed to 12345678. In short, I can name it myself. It is not necessary to have this network name. This password is the best password for 8 or more. This command has three parameters, mode: whether to enable the virtual WiFi network card, or disallow to disable. Ssid: The name of the wireless network, preferably in English (using wuminPC as an example), that is, the name of the wifi to be set. Key: wireless network password, more than eight characters (using wuminWiFi as an example), that is, the wifi password you want to set. The above three parameters can be used separately. For example, only mode=disallow can be used to directly disable the virtual Wifi NIC. I believe that people who have used DOS before know how to run the command, that is, press enter netsh wlan set hostednetwork mode=allow ssid=wuminPC key=wuminWiFi after running to see the following content:

Then open &ldquo ;Network and Sharing Center -&&quoquo;Change Adapter Settings See if there is one more item. If there is more than this item, Microsoft Virtual WiFi Miniport Adapter", then the setting before you is Really. If the connection is successful, one more network card will be connected to the wireless network of “Microsoft Virtual WiFi Miniport Adapter”. For convenience, rename it to virtual WiFi. If not, just update the wireless network card driver and it will be OK. 3. Set up Internet Connection Sharing: In the “Network Connections” window, right-click on the network connection that is connected to the Internet, select “Properties”→“Share”, check “Allow other · ·····Connect (N)” and select “Virtual WiFi”. Once confirmed, the “Shared” text will appear next to the shared NIC icon, indicating that “Broadband Connection” has been shared to “Virtual WiFi.”

4, open the wireless network: continue to run in the command prompt: netsh wlan start hostednetwork Of course you can create a new Notepad file copy: netsh wlan start hostednetwork Then save as: start WIFI hotspot.bat next boot At that time, you only need to run as “administrator>;

At this point, the red cross of the virtual WiFi disappears, the WiFi base station has been set up, it is best to set a fixed ip for the virtual wifi, enter the virtual WIFI attribute and then enter the TCP/IP attribute, select the following IP address, The IP address can be set to 192.168.3.1 (as long as it does not conflict with the shared network IP, what IP segment is OK) Subnet mask: 255.255.255.0, the host is set up. The handset with the WiFi module searches for the wireless network wuminPC, enters the password wuminWiFi, and then enters a static IP. The IP segment and the virtual WIFI are in an IP segment. For example, according to the IP access network set above, it can be set. Into 192.168.3.2 (2 this number as long as you do not fill in 1), routing and DNS set to virtual WIFI IP on the line. This will be able to share the Internet network name and password can be written according to their favorite. The wireless network established by this method is more stable and simpler than using connetify, and the network speed is good