After installing Win7 system, only the U disk can be booted from the hard disk to enter the system. The cause of the failure and the solution

Reinstalling the Win7 system is a piece of cake for many friends, but some friends found that they can't enter the system after installing the Win7 system. Only by booting from the hard disk through the USB flash drive, you can enter the win7 system. So how to solve this situation? Let's take a look at the way this small series is organized for everyone.

The cause of the failure one:

The computer has more than two hard disks, and the hard disk of your installation system is not set to the first boot hard disk.

Workaround:

1, press the BIOS hotkey after booting (general DEL can enter, specifically based on your own computer) to enter the BIOS;

2, you can see the boot device Priority, this is the choice of the boot order of the hard disk and other devices. For two hard drives, you need to set the priority of the hard drives first. (Specificly with your own BIOS as a standard, for reference only)

3. Enter the Hard Disk Drivers (hard disk drive) in the above figure and specify the order of the two hard disks. Turn the disk that needs to be started to the top, usually by pressing the page key.

4, then return to the previous layer, enter the boot device Priority, will list 1st boot device, this is the first boot device, select the hard disk.

5, Finally save to exit the BIOS settings, press Save Changes and Exit ------&rarr in exit, save changes and exit

see if you can The system is gone, can't read the following article.

Method 2: Repair boot

1, find a U disk boot disk with Windows boot repair tool Pe, such as computer store;

2, enter the WINPE system;

3, double-click to open the Windows boot repair, double click on the following and select “automatic repair”;

3, wait for the repair to complete, then exit, in order to be safe, we will Take the second method!

Related reading:

Installing win7 system prompts <; unable to update the startup configuration & rdquo; troubleshooting reasons and solutions

Win7 system after installing UE, the shutdown always appears blue screen And prompt error code 0x00000018 fault analysis and solution

The above is the Win7 system can only boot from the U disk boot disk hard drive into the solution, I hope to help everyone.