Win10 system comes with virtual machine Hyper-v networking solution

Methods/Steps

Open the Hyper-v Manager of the virtual machine under Win10, check the settings of the installed virtual machine. For example, my win7 system

Click to open the settings. On the left side of the network adapter, then on the right side of the virtual switch select the new virtual switch and then determine.

Return to the Hyper-v Manager and click on the Virtual Switch Manager.

Create a virtual switch. If you want to virtualize the machine, you need to select the external and only want the virtual machine and the machine. Interactive use can choose internal (you can transfer files to each other through Network Neighborhood)

This is the external introduction

After the point is determined, a < will be generated in the main computer system. Br>

At this time, right click on the vEthernet point to select the attribute,

select the interntet protocol version 4 (tcp/ipv4)

Ip can be specified or automatically according to the situation. Get

and another Ethernet adapter will not be used. Under normal circumstances, the computer can connect to the Internet. If you can't delete the newly created virtual machine manager in the virtual switch manager, re-establish it. Just fine.

At this time, you can enter our virtual machine system and set the following as follows: Ip can be specified according to the situation or automatically obtained.

At this time, the virtual machine can connect to the Internet. It can also be connected to a local LAN computer.

Notes

If the connection is not successful, delete the created new virtual machine manager and press step 456 again.