How to install the ghost version of Win10? Hard disk installation ghost version Win10

How to install Win10 Win10? Many people are not very clear, the following small series for everyone to introduce a simple method, is the hard disk installation ghost version Win10 method, a friend in need can come over to refer to!

Windows10 system came out, everyone wants to try it. At the beginning, it is Microsoft's installation version of Win10 image file. Now, there are a lot of ghost versions coming out. I personally prefer the ghost version, which is easier to install. Of course, there is no need to activate and so on.

Ghost version of Win10 can be installed to the C drive, can also be installed to other drives, the difference is only in the installation, choose to install the drive letter is different, I just want to try Win10, the main system is still Win7, so , the ghost version of Win10 can be installed to the D drive.

Ghost version Win10 can be installed with U disk, or can be installed with hard disk. This article describes how to use hard disk to install, it is more convenient than U disk installation, no need to make boot U disk, no need to set BIOS. More suitable for novice installation.

Ghost version also has a risk. When installing, be sure to back up the important files in the disk of Win10. When selecting the installation disk, be sure to select the standard, otherwise the data will be lost, and the consequences are responsible.

Tools/Materials

Computer, Internet

ghost installation tools

ghost version Win10 system ISO image file

Method /Steps

To install the ghost version of the Win10 system, the first step is to download the ghost version of the Win10 system iso image file from the Internet. Now the online ghost version of the Win10 system is still relatively small, to be carefully searched to find.

After downloading to disk, unzip the Win10 image. Pay attention to two when decompressing:

One, don't unzip to the installation disk. For example, I want to install Win10 system on D disk. , so, you can not extract to the D drive, this can not be installed;

Second, you must directly extract to the root directory of the disk, do not put in a folder, not to put in several layers of folders In the case, the installation will fail, for example, I put it directly in the root directory of the F drive.

After decompression, there are two points to note:

One, find the GHO file with the suffix .GHO(.gho), and it is the largest one in the entire compressed file, about About 3-4G, as shown in the Windows.GHO file, remember its name.

Second, find the installation tool Ghost.exe, I have three installation tools in this image file, one is Ghost.exe, which is a tool for installing 32-bit system. There are also two "installation system.exe", these two are the same, there is a backup, choose one, is to install a 64-bit system, the version is Ghost V13.5.23.208, install Win10, need The Ghost version is at least V11.5.

Open “Install System.exe”, the advanced options are also opened, the overall interface is as follows, in this interface, the rest of the options default, as long as the operation is as follows:

Step 1: Select “Restore System”;

Step 2: Load the image file, in fact, it will automatically search for the loaded, if it is not automatically loaded, click “Open”, manually load Just remember the Windows.GHO file;

Step 3: Select the disk to install Win10 system, I want to install Win10 to D disk, so choose “D:”, this must be Note that if the choice is wrong, it will cause data loss. Be careful not only to look at the drive letter (because sometimes the drive letter will be confused), but also to look at the disk size, so that the disk can be better identified.

Step 4: After carefully checking the above settings, if it is correct, press “OK", if the confirmation prompt pops up, OK.

When you confirm the installation, you will start copying the Win10 file to the D drive. The time is about five or six minutes. This process is performed in the Windows window. After copying, do not tamper with the keyboard. Copy error.

After Win10 file copy and restore, you need to restart, enter the official installation step, restart immediately, or restart later, of course, immediately restart, the faster the installation is better.

After rebooting, enter the Win10 installation process. The first step is of course to fill in the product key. The Ghost version system will generally provide the product key in the compressed file. If not provided, download it. The page will also be available, I found it from the download page, this key, to be prepared before the installation of Win10, written on paper, to fill in the installation, if not, it is dumbfounded.

The next step is to get started quickly, because it is Ghost version system, so some settings can not be enabled, you must manually set it, close some default startup items, so press “Customize settings&rdquo ;, don't choose “use quick settings”.

The first setting page, here, there are four settings, I have turned them off anyway, if it is a tablet, this "location" does not have to be closed, maybe To influence usage, press “Next”.

The second setting page, I also turned them off, this is to report some errors to Microsoft, as well as some experience, etc., this should understand, Ghost version, nothing good Report and experience, turn off, next step.

The following is the installation process, but the time is not long. When prompted "Who is the user of this computer", most of them are their own computers, of course, select "I own it" & rdquo This one, the next step.

To enter the personalized settings, you have to register for a Microsoft account. I just want to experience Win10 and don't want to register, so I chose "to skip this step" directly.

If you don't sign up for a Microsoft account, you have to use a local account. You must create an account for this computer. This is fine. The account you created is used on this computer. Fill in a username first. , customize one; then enter the same password twice, then enter a prompt password (or words), these are all custom.

Start writing the above settings to the system, as well as some registrations, configuration files and desktops, etc., the time is not too long, it will take a few minutes.

When all is done, enter the Win10 desktop, the desktop has only a recycle bin, unlike XP and Win7, what network, computer (my computer), documentation Icons and so on, unlike the Win8 system, Win10 has a start menu.

After installing the Win10 system, you can experience it.

Notes

Which disk to which Win10 is installed, which important files of the disk should be transferred or backed up, otherwise it will be cleaned up, remember to remember.

If the Ghost V13.5.23.208 tool is not installed in the iso image file, you can download it online.

Before installation, be sure to prepare the installation key. It must be written on paper. It can only be filled in. It cannot be placed in the computer. Because the key cannot be opened when the key is filled, it cannot be copied. With paste.

The above is the hard disk installation ghost version Win10 graphic tutorial, everyone learned? hopefully this can provide beneficial help to everyone!