WinXP system 0x0000007b blue screen problem solution

Many users will install 0x0000007b blue screen problem when installing or using WinXP system. The reason and solution for the blue screen at each moment is different. The following is a small list, I hope to help you.

One, 0x0000007b blue screen appears when installing the system:

Cause: This is generally caused by the system driver does not include the motherboard SATA, AHCI driver.

Solution:

1. Replace the disk controller to drive a more robust system installation disk;

2. Change the hard disk mode from ACHI or SATA to BIOS in the motherboard BIOS. IDE mode.

Second, the system installation is completed after the restart 0x0000007b blue screen

Check whether there is a U disk boot disk is also inserted in the computer USB port, remove and restart.

Third, the initialization of the I /O system (usually refers to the boot device or file system) failed.

Reasons and solutions:

1. You have installed a second hard disk on your computer, or a SCSI device and a modem. These devices cause resource conflicts with the original hard disk. Please check to resolve the issue with the appropriate settings.

2, the virus destroys the system files, please use anti-virus software to kill the virus, and then use the Chkdsk /r command in the "command console" provided by Windows to check the repair system files.

Fourth, the XP system dual hard disk appears 0x0000007b

Solution: Use diskgenius to rebuild the MBR of the main hard disk.

There are too many possible reasons for the blue screen, we can only use the most clumsy method to check one by one. Don't be bothered, the right medicine is the key.