How to make a switch IP address

In the past, switching IP addresses used to modify the registry, but the computer has to be restarted, which is more troublesome than the original basic operation. There is a way to switch quickly.
For example, you To switch between the two networks A, B.
first set the IP address of the network A in the network card properties,
then enter it in the run: netsh interface dump> c: A
so you Just set up a record file of the IP address of the A network in the C drive.
In the same way, you create a record file of the IP address of the B network in the C drive, that is, first change the IP address to the B network, < BR> Then enter it in the run: netsh interface dump>c:B
Ok, now you can switch IP as you like,
If you are now in the IP address setting state of A network, To switch to the IP address of the B network,
as long as you enter the switch command in the run: netsh -fc:B, it will automatically switch over.
However, sometimes it is more trouble to remember and input the switch command. You can set it as a batch command for a real one-click switch, as follows: first enter: edit in the run, open the command edit box, enter it inside: netshu -fc: B, then save it, name it B.bat, so you intuitively know that it is to switch to B The address of the network. Later, when you want to switch to the IP address of the B network under the address status of the A network, just double-click the B.bat batch file to be OK. In the same way, make a batch to switch to the A network. Process the file, so that you really achieve a one-click switch!: