System error prompt Daquan

Computer Shop News [English Tips] Abort, Retry, Ignore, fail? [Chinese] Exit, try again, ignore, cancel? [Cause] The given command was not recognized, or a disk or device error occurred that prevented the command from being executed. It may be that the disk is damaged or the floppy drive door is not closed. [Reaction] Press A to terminate completely and return to the DOS prompt. Press the R key to repeat the command. Press the I button to continue processing, ignore the error, very risky, it is recommended not to use the F key. Do not execute the problematic command, continue the following processing. Sometimes used. [English Tip] Access Denied [Chinese] Deny access [Cause] An attempt was made to open a file marked as read-only, stored on a write-protected disk, or locked on the network. This information is also generated if the “Type” command is used on a subdirectory, or if the “CD(chdir)” command is used on a file. [Policy] You should use the “Attrib” command to delete the read-only status of the file or remove the write protection from the disk, and then try again. [English Tip] Bad Command or file name [Chinese] Wrong command or file name [Cause] The command entered is not recognized [Countermeasure] It should be checked to ensure the correctness of the input command to confirm the search path specified in the specified directory or with the Path command. The command file can be found on it. [English Tip] Boot error [Chinese] Boot error [Cause] A peripheral that should not be detected at boot time. [Reaction] The setting parameters of the computer should be checked. If the user cannot solve the problem by himself, please find a special maintenance person. [English Tips] Cannot find system files [Chinese] Cannot find system files [Cause] An attempt was made to load an operating system from a drive that does not contain system files. [Reaction] The system file should be copied to the root directory with the sys command. The format/s command can be used to reformat the disk unless it is really impossible to restore the system files. [English Tip] Cannot load command, system halted [Chinese] Cannot load command, system aborted [Cause] The application overwrites all or part of Command.com in memory. [Reaction] You should reboot your computer to check that the data modified by the application is complete. If necessary, copy Command.com to a subdirectory so that DOS can find Command.com here when you exit the application. [English Tip] Cannot read file allocation table [Chinese] Cannot read the file allocation table [Cause] The file allocation table is bad. [Policy] If you can still find some data, then back them up to an empty disk. You can also use the Chkdsk command to repair the file allocation table and reformat the disk if necessary. If the problem occurs repeatedly, you should repair the drive or replace the drive. [English Tips] Divide Overflow [Chinese] Assign overflow, divide by zero error [Cause] The program may be written with errors, not debugged, or it may be in conflict with other programs in memory. [Reaction] Check other programs in memory or no longer use this program. [English Tip] Drive Not Ready Error [Chinese] The drive is not ready [Cause] There is no such drive or no disk. [Policy] Check the disk or replace the disk. [English Tip] Duplicate File Name or File Not Found [Chinese] File name or not found [Cause] When you give a file a name, it has the same name as the file or when you manipulate the file. [Policy] Change the name or check the spelling of the file name. [English Tip] Error loading operating system [Chinese] Boot operating system error [Cause] The operating system file was not found or is corrupt. [Policy] Use the SYS command to copy the operating system files to the drive. If necessary, copy the config.sys and autoexec.bat files to the root directory. If you cannot recover the system files, boot the system from the floppy disk, back up the data, and reformat the disk with the Format/s command. [English Tips] EXEC failure [Chinese] File execution failed [Cause] The application's executable file contains errors that affect the burial, or the file cannot be opened because too many files have already been opened. The file may be related to the current DOS version. Not compatible. [Policy] Check the DOS version. If the version is correct, you can solve this problem by editing the Files command in Config.sys. [English Tips] File allocation table bad [Chinese] File allocation table is corrupted [Cause] Many reasons, such as virus attack, sudden shutdown, abnormal shutdown, etc. can destroy the allocation table [Countermeasure] Back up all available data to empty In the disk, do not overwrite the previous backup. It is also permitted to solve this problem by referring to the Chkdsk command. If necessary, reformat the floppy disk, if the problem is repeated, then send the drive to repair. [English Tips] File cannot be copied onto itself [Chinese] Files cannot be copied to themselves [Cause] You specified the same file in the source and destination files, or forgot to write the file name. [Policy] Change the source or target file as needed, and then try again. [English Tips] File creation Error [Chinese] File creation error [Cause] It may be that there is not enough space on the disk for the user to create the file, the file you want to create already exists, and it is a read-only file or you want to use it already exists. The name of the file to replace the name of the file. [Policy] You can change the disk, or use another target name, another target location, or use the Attrib command to remove the read-only attribute of the file. [English Tip] File not found [Chinese] File not found [Cause] The file was not found in the current directory or any directory specified by the Path, Append command, or the specified directory is empty. [Policy] Check the spelling and location of the file name, if you need to change the search path. [English Tips] General failure [Chinese] General failure [Cause] DOS cannot determine the cause of the error, usually because the disk in the drive is not formatted or formatted into a non-DOS system. [Reaction] The disk should be reformatted. [English Tips] Incorrect DOS version [Chinese] DOS version does not match [Cause] A different version of the external command was entered. [Policy] Set the version with setver or use the correct executable file. [English Tips] Insufficient Disk Space [Chinese] Insufficient disk space [Cause] There is no space available on the disk to copy files or create files. [Reaction] You can delete some useless files or replace a larger disk. [English Tips] Insufficient memory [Chinese] Insufficient memory [Cause] There is not enough memory to process the commands entered by the user, generally referring to basic memory. [Policy] Some memory-resident files should be deleted or optimized for memory management. You can also add more memory to your system to fit your application. [English Tip] Invalid directory [Chinese] Illegal directory [Cause] An invalid directory name or a directory name that does not exist has been entered. [Policy] Check the spelling of the catalog. [English Tips] Invalid Drive Specification [Chinese] Invalid drive definition [Cause] There is no such driver at all, it may be a spelling error. If you cannot specify an optical drive, the driver may not be installed. [Policy] Reinstall the optical drive. [English Tip] Invalid filename or file not found [Chinese] Invalid file name or file not found [Cause] The file name entered contains invalid characters or wildcard characters, or the reserved device name is used as the file name. [Policy] Try using different file names. [English Tips] Invalid Media, track 0 Bad or Unusable [Chinese] Invalid format, 0 track is damaged or not available [Cause] Generally, the disk is damaged. [Reaction] Replace the disk. [English Tip] Invalid parameter [Chinese] Invalid parameter [Cause] No correct parameters are specified on the command line, or there are duplicate and forbidden parameters. [Reaction] Check the spelling or grammar of the command input. [English Tips] Invalid partition table [Chinese] Invalid partition table [Cause] There is an error in the hard disk partition information. [Policy] You should back up the data you can find and run Fdisk to reset the hard disk partition. [English prompt] Invalid path, not directory, or directory not empty [Chinese] Invalid path, non-directory, or directory is not empty [Cause] The system cannot locate the specified directory, or the user enters a file name instead of the directory name, or The directory contains files (or subdirectories) that cannot be deleted. [Policy] Check the spelling of the directory name. If the directory is empty, it may contain hidden files. Use the Dir/ah command to display any possible hidden files. Use attrib to change the attributes and delete them. [English Tip] Invalid syntax [Chinese] Invalid syntax [Cause] The system cannot process the syntax of user input. [Policy] You should check the correct file format and try again. [English Tip] No fixed disk Present [Chinese] No hard disk [Cause] The system cannot detect the existence of the hard disk. [Reaction] The set drive class parameters should be checked. If the problem cannot be solved, then it is sent for repair. [English Tip] Non-System Disk or Disk Error [Chinese] Non-system disk or disk error [Cause] The system cannot find the system file in the current disk. [Reaction] You should insert a disk containing system files or reboot your computer. [English Tip] Not enough memory [Chinese] Out of memory [Cause] See Insufficient memory [Action] [English Tip] NOT READY, READING DRIVE X [Chinese] Drive X is not ready [Cause] There is no disk in the specified drive or The door is not closed. [Reaction] Insert a disk to the specified drive or close the drive door. [English Tips] Program too big to fit in memory [Chinese] Can't load memory too much [Cause] See Insufficient memory [Action] [English Tip] Required Parameter missing [Chinese] Missing necessary parameters [Cause] See Invalid Parameter [Action] [English Tip] Too many open files [Chinese] Too many open files [Cause] The number of open files specified by the system has been exceeded. [Reaction] You should use the Files command in the Config.sys file to increase the maximum number and reboot the computer. [English Tips] Unrecognized command in CONFIG.SYS [Chinese] There is an unrecognizable command in config.sys [Cause] The command in the Config.sys file is not recognized when the system is booted. [Countermeasure] The config.sys file should be edited. Invalid line. [English Tip] Write fault error [Chinese] Write failure error [Cause] The system cannot write data on the disk. [Policy] Remove the disk and re-plug it. If it still doesn't work, run Chkdsk or Scandisk. If the disk cannot be recovered, throw it away. [English Tips] Write protect error [Chinese] Write protection error [Cause] Write protection on the disk [Reaction] Remove the disk, remove the write protection, and try again.