How to solve the problem of local connection limitation under XP system

Local connection has taken a very important position in our online process, whether it is on the Internet or LAN, we need to start from the "local connection", network parameters Make the appropriate configuration. However, in the actual web process, we sometimes find that "local connections" may have various inexplicable failures, such as inexplicable network connections become restricted, and these failures often prevent us from targeting network parameters. Sexually set, which affects our Internet efficiency.

In order to effectively improve the efficiency of the Internet, we must master some troubleshooting methods related to "local connection"; this is not the case, this article lists the "local connection" and the more common occurrences. Fault phenomenon, and put forward different countermeasures for each fault phenomenon, I believe it can bring you benefits!

Solve<quo;Local connection"Restricted fault

Some ADSL users are Windows xp SP2

Under the operating system, broadband dial-up Internet access often uses the built-in PPPoE dialing method of Windows system; however, when using this method to access the Internet, these users may find in the network connection list window. The local connection & rdquo; icon display status, often inexplicably adjusted to "restricted or no connection", but in this state the Internet operation can be normal. That strange state shows how the fault occurs. How can we eliminate such a fault phenomenon?

If the display status of "local connection" becomes unrestricted, it becomes "restricted". Or no connection, this is usually caused by not assigning a fixed IP address to the NIC. Under normal circumstances, when we find that the display status of “local connection” is not normal, we can often try to set a static IP address for the network connection. This method can often solve many inexplicable network failures for us. Once we find that the local network connection does not use a fixed IP address, you can click the “Start”/“Settings"/“Network Connections" command, in the subsequent network connection list interface, Right-click the "Local Area Connection" icon and execute the "Properties" command from the right-click menu to open the property settings window for the local connection; in the "General" tab of the window, select "Internet" Agreement & rdquo; project, and click on the "Properties" button (as shown in Figure 1);

Figure 1 Selected "Internet Protocol" After clicking on the item and clicking on “Properties”, select the “Use the following IP address” option and set the IP address of the local computer to “192.168.0.2” and then try again. Set the IP address of the local gateway to “192.168.0.1” (by default, the factory IP address of most ADSL devices is 192.168.0.1), and finally click the “OK” button and restart the computer. The system believes that the state-limited failure of "local connection" can be solved. Editor's Note: Some ADSL devices have a factory IP address of 192.168.1.1.

Solve the "local connection" redundant trouble

Generally speaking, each time a computer is configured with a network card, there should be a corresponding "local connection" in the network connection list window. ” The icon appears. If there are multiple network cards installed in the computer, then we should be able to see that there are multiple “local connections” icons, and each "local connection" should have a name behind it. Similar to the number of "2" and "3", which corresponds to the number of network cards.

In fact, we sometimes only have one network card installed in the computer, but there are still two “local connection” icons in the network connection list window, so why is this kind of failure? How can we solve this fault?