Xp system installation: how to reinstall windows XP system, teach you step by step?

Often some netizens encounter computer problems or system crashes, and need to reinstall windows xp system, but many people have not installed them themselves, thinking that the installation system is like installing software, and the result is that the system cannot be installed after downloading.
So for the convenience of everyone to install the system, edit how to install the system today. As long as it is a caring person, after patiently reading it, I found that the system installation is not so mysterious. If you dare to try it, you can learn it quickly.
PS: But when you install it, you will inevitably encounter such small problems. Everyone should pay attention to it. It is very likely that a small problem will cause the whole installation to fail or the system will not work well after installation!
Nowadays, Ghost XP, which is popular for fast installation, eliminates these troubles, and it is “fool-like” one-click installation, which is convenient and simple, anyone can install Ghost XP system by themselves.
*** Welcome to the system tutorial "Reload Ghost XP system to let you learn for three minutes"
The following describes several methods of system installation (maybe I am not enough to write, welcome to leave a message): Br>1. U disk installation
2. Hard disk installation
3. CD-ROM installation
4. Virtual CD-ROM installation
5. Installation in PE system
6. Installation in DOS system due to U There are system tutorials in the disk installation and hard disk installation download stations. Here are a few other windows xp system installation methods. I hope you can read them carefully to help you overcome the embarrassing situation that cannot be installed.
Steps/Methods
First, the CD-ROM installation
1. First, buy a system disk, or if you have the conditions, it is best to burn one yourself (to buy a good empty disk, find one on the Internet) Good system image, file format. ISO), in view of the market price of a few dollars sold in the market
is too poor, the number of times used or the CD-ROM aging is prone to read errors, some The file could not be installed.
2. Set the CD-ROM drive to start. Different motherboards enter the BIOS settings in a slightly different way. IBM notebooks are powered by pressing the [Access] button. Some computers are powered on and press the [Del] button. Some are booted and press the [F12] button. When booting, there are generally prompts. Br> Which of the above is the one you press.
3. After setting [CD-ROM], press [F10] to save and exit. If prompted, “boot from cd please press any key…”, just press a button and you can enter the installation. It is. The system has to be installed on the C drive. Everyone knows
, after the carriage return, you are prompted to format, format it. After formatting, you can start the installation. When you click [Next], you can click twice, and you don't need to set anything else.
4. After installing the windows, remove the CD and install the driver. OK
2. Install in the PE system
1. In the existing windows system, download a system image online, search online, many, there are also on the Thunder, the file name suffix is ​​.ISO.
Download a general-purpose PE and install it on a non-system disk. For example, if Windows is installed on a C drive, install PE on any disk in D\\E\\F... After installing the downloaded PE, restart the computer. (Note: Rainforest wood wind PE installation selects the default installation, otherwise it will not start after installation)
2. After rebooting, choose to enter the PE system. After entering, do not operate. Go directly to [My Computer], right click C drive & mdash; — click [Format] & mdash; & mdash; then close [My Computer] & mdash; & mdash; [Start] Formatting (not so easy to format the C drive)
3. Click [Start] & mdash; & mdash; [Program], find the virtual drive manager (called VDM virtual drive in the rain forest wood PE), click [Load], find the downloaded system image and double click. Then, open [My Computer] and find that there is a virtual CD-ROM named after the system image we downloaded. Double-click to open, find setup.exe, double-click to run to enter the installation.
Note: In PE There is a good way to reinstall Windows XP in the system, that is, burn the PE system to the U disk. After booting, enter the BIOS and set it to U disk boot. Since PE is simpler and more convenient to use, it is recommended that you download a PE image and burn only the PE image. U disk can be, so you can avoid the problem of always formatting the C drive.
Three, DOS system installation
DOS system installation is very simple, complex how to start the DOS system. Now there are many DOS toolboxes on the Internet (such as Dwarf DOS Toolbox, MaxDOS Toolbox, etc.), which can be installed on the hard disk in Windows system. It is possible to choose whether to enter Windows or DOS system.
1. After entering the DOS system, switch the drive letter to the folder where the downloaded system image is located. For example, the system image is placed in the folder named “WIN” in the D drive (note that the system is in advance in the windows system). Use WINRAR to extract the system image to this folder). The steps in this step are: first enter the command D:, then press Enter, the drive letter is D:\\>, then enter cd win (note that there is a space after cd), the drive letter is D:\\ WIN>, then enter winnt, enter, and then started the installation...
Note: DOS installation I only installed in a pure DOS system, I do not know whether it is the same in the DOS toolbox, theoretically should be possible But also note that the DOS system does not support the NTFS hard disk partition format.