The master's six strokes make Windows XP system quickly shut down

Usually friends who use old machines and laptops, I am afraid it is difficult to tolerate the system startup process that is slow and crazy. Even after trying all kinds of optimization cheats and using all the optimization software, Windows XP is still a slow start, and the slow shutdown is frustrating. In fact, Windows XP has already prepared a shortcut for you to quickly switch on and off, it is standby and hibernation.

First, set the standby power supply reasonably

Many times, just leave the computer temporarily, then you do not need to turn off the power of most hardware devices, such as USB interface, Network card, mouse and other equipment, so that the recovery speed can be improved.

Take the network card as an example, open “Device Manager", right click on the NIC project and select the “Properties" command in the pop-up menu to open the property settings dialog. Select the “Power Management” tab and uncheck the “Allow the computer to turn off this device to save power” option by clicking Apply. Use the same method to disable the power off function of devices such as USB and mouse.

Second, the standby state can also turn off the power

The normal standby method is not able to turn off the power, because the data is stored in the memory, once shut down, will Will cause data loss. To shut down, only sleep is used, but sleep starts longer. If you use the STR technology of the motherboard power supply, you can turn off the power while in standby, and it takes only a few seconds to restore the computer to work.

Most motherboards support STR technology. Take the Soyuz SY-I5PRLE motherboard as an example. After booting, go to the CMOS settings page and select “Power Management Setup”. After entering, find the “ACPI Suspend Type” item and set it to “S3(STR)” mode to save the CMOS settings. When the standby is used in the future, the power of the chassis will be automatically turned off. When the power button of the chassis is pressed, the system can be restored to the saved state during standby at high speed.

When using STR technology for standby, do not cut off the power supply of the motherboard, otherwise the saved data will be lost. In addition, to wake up the system with the mouse and keyboard in the standby state, you can set it in CMOS and set “PS/S KB /MS Wake up From S3-S5” as “Allow”.

Third, solve the problem of standby automatic recovery

When the system is in standby, it will automatically resume from the standby state from time to time, and automatically enter the standby state. Most of this problem is caused by improper power settings of the network card. To do this, expand the “Network Adapter” in the “Device Manager”, double-click the NIC item to open the Properties window, in the “Power Management” tab, cancel “Allow this device to take the computer out of standby. Check the status & rdquo;

Previous 12 Next Total 2 Pages