Shield xp five-item network function makes the system extremely fast

In order to make the system startup speed unaffected, we can disconnect the temporarily unused network mapping in the local computer as follows:
First double-click the system with the mouse The "My Computer" icon in the desktop, in the pop-up window, click the "Tools" item in the menu bar, and execute the "Disconnect Network Drive" command from the drop-down menu that appears. Then select one of the network drive partition letters that you are not using, and click the "OK" button.

Finding ways to get Windows XP system to start at a very fast speed has always been the unremitting pursuit of computer enthusiasts. However, when we exhausted the tricks of various optimization systems, the progress bar in the system startup screen still needs to be rotated over a dozen times to start the system successfully. What is going on? Is it the various kinds summarized in the media? System optimization tricks are used to "flicker" people? In fact, many of the network settings hidden in the dark of the system, many system optimization tricks can not be touched, in many cases because of these improperly set network features drag Slow system startup speed; for this reason, we only need to shield these improper network functions, we will be able to speed up the system and add a whip!

1. Block network sharing function< Br> If our computer is not in the unit LAN network, then the network sharing function that has been enabled is actually useless. Its existence will drag down the system startup speed; if you want to increase the system startup speed as much as possible, We can completely block the network sharing function that has been enabled in the local system. Here are the specific blocking steps:
First execute the “Settings> ” icon, and right-click the icon to execute the “Properties" command from the shortcut menu that appears, open the local connection property settings window;
next in the "General" tab of the window In the middle, find "This connection uses the following items" in the list box, and the "File and Printer Sharing for Microsoft Network" option, and remove the check mark in the box in front of the option, and finally click “ OK & rdquo The button closes the property setting window, so the system will not take time to check the content of the network sharing at the next startup.

2, shielding function
full control of the computer system will automatically related to the local hard disk to share files in a folder to search and scan every time you start, and access the property to different shared folders, then the system The time to scan the target shared folder will also be different; for example, if a shared folder is set to “read-only" permission, the system may only need 1 millisecond to scan the shared folder. When the access permission of the shared folder is set to "full control", the system may scan the shared folder for 1.5 milliseconds. It can be seen that when the shared folder's "full control" function is enabled, The startup speed of the system will also be affected to some extent. To do this, when we don't want our shared resources to let others edit and modify, just simply set the properties of the shared folder to "Read only", just do it, and don't assume it is set to “ Fully shared, after all, under this access property, the security of the shared folder is not guaranteed, but it also affects the system startup speed. To mask the "full control" function of the target shared folder, you can follow the steps below:
First open the system's explorer window, find the target shared folder in the window, and then use Right-click the corresponding folder icon and select the “Share & Security” command option from the shortcut menu that appears, and open the property settings window to the target shared folder.
Secondly, click the “Security" tab in the property settings window to open the tab settings page. In the "Group or User Name" list box of the page, select the specific user account that you frequently log in to the system. For example, the author here chooses the "ower” account.
Next, in the corresponding “ower permissions” list box, select the "Full Control" item and uncheck the box in the "Allow" box corresponding to the option, so that we can The "Full Control" function of the target shared folder is blocked, and then according to the actual access needs, open the target shared folder "Read & rdquo; permission or "write" permissions, and finally click “ Confirm the & rdquo; button, I believe that the system's startup speed can be further improved.

3, shielding automatic search function
when you start your computer installed Windows XP system, the computer will automatically do the general idea to search local area network environment, all shared resources, it is clear from this proposition do The "behavior" behavior also affects the quick start of a computer system. In order to improve the system startup speed, we can mask the function of the local system to automatically search for shared resources as follows:
First open the Explorer window of the local system, click the “Tools” option in the menu bar of the window. From the drop-down list that appears, click “Folder Options”, go to the system's folder option settings interface, click on the “View” tab to open the option settings window;
find this In the window, select the "Automatically search for network folders and printers" option, and cancel the check mark in the box in front of the option, and then click the "OK" button, so that the computer system will start next time. It won't take time to automatically search for other shared resources in the LAN environment, so the system startup speed should be significantly improved.

4, the shielding function automatically assigned
referred to herein & ldquo; & rdquo ;, automatic allocation function actually refers to the Windows system functions automatically assigned an IP address for the local device card in the default state; once If the IP address of the local network card is set to be automatically obtained, then each time the computer system starts, it will take a certain time to apply for a dynamic IP address that can be used by the DHCP server in the LAN network. If the DHCP server is not accessible, the computer system It will also try to connect and access the DHCP server repeatedly until the access timeout, so the system startup speed will be very seriously affected, and even the system suspended state. In order to avoid the system taking time to connect and access the DHCP server during the startup process, we only need to set a static IP address for the NIC device in advance. To assign a static IP address to the NIC device, follow the steps below: Br> First click the “Start”/“Settings /“Network Connections”/“Local Connections” command to go directly to the local system "local connection" property setting interface, in In the “General” tab of the setting interface, select the “Internet Protocol (TCP/IP)” option and click the “Properties” button on the corresponding page to open the property setting interface. In the “Use the following IP address” option, specify the IP address of the same subnet as the ADSL device address for the NIC device; for example, the IP address of the ADSL device is generally “192.168.1.1” , then we can set the NIC IP address to "192.168.1.11", and set the subnet mask address to "ld 255" .255.255.0”, the gateway address is set to “192.168.1.1”.
Next, "Use the following DNS server address" to select, and then fill in the real DNS server IP address of the local ISP here, for example, the real DNS address of the ISP is "61.172.7.1" Then, we can fill in the address here, and click “ OK & rdquo;, in order to save the above IP address parameters, I believe that the computer system will not need to spend time in the future when starting DHCP server, then the system startup speed will definitely take it to the next level.

5, shielding the network mapping function
in order to facilitate quick access every time you were on the other computer to share files in a folder, many people tend to each other through the network mapping function to map the shared folders cost A disk partition in the local computer. Although this method brings great convenience to shared access, it brings a lot of influence to the startup of the system. After all, the system takes time to search, scan, and connect to the shared folder of each other every time it starts. In fact, we don't need to access the shared folder every time we turn on the phone. Obviously, the network mapping function of the shared folder can be opened at will, which will seriously slow down the startup speed of the computer system.
Of course, we can also use the "net use" command to achieve the purpose of disconnecting the network mapping connection. When using this method to shield the network mapping function, you only need to open the system running dialog and execute it in it. “cmd” string command to switch the system interface to the MS-DOS command line state; then execute the “net use x: /del” string command at the DOS prompt to partition the network disk into “X&rdquo” The network map connection is broken. To quickly disconnect all network map connections on the local computer, you only need to execute the “net use * /del” string command.