Windows xp sharing problem setting method

This article introduces you to the Windows xp sharing problem setting method, I hope to help everyone.
Make sure you can ping each other before you do this.
1. Open the guest account.
2. Allow Guest users to access the machine: Open the Group Policy Editor, select "Computer Configuration → Windows Settings → Security Settings → Local Policies → User Rights Assignment", delete the "Deny access to this computer from the network" policy "GUEST" account.
3. Change the network access mode: Open the Group Policy Editor, select "Computer Configuration → Windows Settings → Security Settings → Local Policies → Security Options", double-click the "Network Access: Local Account Sharing and Security Mode" policy. Change "Guest only - local user since guest authentication" to "classic: local users authenticate with their own identity".
4. Undo empty password restriction: Disable the "Account: Local account with blank password only allows console login" policy in the system "Security Options".
5. Network neighbors can't see the computer: Open "Control Panel→Performance and Maintenance→Administrative Tools→Services" and start the "Computer Browser" service inside.
6. Add shared file permission options: Open "My Computer → Tools → Folder Properties → View → Advanced Settings", and then cancel the selection before "Simple File Sharing (Recommended)", if there is "Mickey Mouse The item also canceled it.
7. Network neighbor does not respond or responds slowly. Turn off WinXP's Task Scheduler. Go to Control Panel/Administrative Tools/Services and open the Task Scheduler Properties dialog box to stop the service. Set the startup type to "Manual".
Basic Conditions for Windows Network Neighborhood Intercommunication:
1) Both computers are turned on and network sharing resources are set;
2) Both computers add "Microsoft Network File and Print Sharing" service;
3) Both parties have correctly set the IP address in the network and must be in a network segment;
4) The firewall is turned off in both computers, or there is no policy in the firewall policy to block the access of the network neighbor.
Windows 98/2000/XP/2003 Access XP User Authentication Problem
First of all, why can't I enable Guest to access:
1. By default, XP disables Guest account
2. Default Under, XP's local security policy prohibits Guest users from accessing the network
3. By default, XP's local security policy -> security option, "Account: use empty password users can only log in to the console" is enabled That is to say, any account with a blank password can't be accessed from the network, only the local login, Guest default empty password...
So, if you need to use Guest to access XP, you need to do the above three Settings: Enable Guest, modify security policy to allow Guest to access from the network, disable security policy in 3 or add a password to Guest.
Sometimes there is another situation: when accessing XP, the username in the login dialog is gray, always a Guest user, and cannot enter another user account.
The reason is that this security policy is at work (Administrative Tools -> Local Security Policy -> Security Options -> "Network Access: Sharing and Security Mode for Local Accounts"). By default, XP access mode is "guest only", then you access it, of course, it is fixed as Guest can not enter other user accounts.
So, the easiest way to access XP is to not modify the guest and only modify the security policy above as "classic". Other systems can access their own account information by accessing XP.
As for accessing 2003, by default, 2003 disables Guest, but there is no XP that nasty default contradictory guest mode sharing, so you can directly enter the username and password to access.
A small office LAN, all winxp systems, can be on the external network, can also see the other computer, but can not see the computer shared by the other party prompts the network path is not correct, or you do not have permission to use the network is probably this meaning I don't remember very clearly!! The guest account is also enabled! Winxp's firewall is also closed, ip address is no problem!! I hope everyone will analyze it!! Thank you very much!
Reason: There is security in Win2000/XP Policy restrictions.
Sometimes, Win2000/XP is "smart" over the head. Although we have enabled the Guest account, we still can't access Win2000/XP from Win98. For example, using a firewall bug fix like Rising, it will modify "Reject". "Access this computer from the network" policy, modify it back as follows:
Start -> Run -> gpedit.msc -> Computer Configuration -> Windows Settings -> Local Policy -> User Rights Assignment -> Delete the guest user in "Deny access to this computer from the network".
Win2000/XP and Win98 Intercommunication
If both computers use Win2000/XP operating system, then setting up LAN is a very simple and easy thing. When the hardware connection is completed, it can be immediately under normal circumstances. See you in the "My Network Places". But if there is a computer in the LAN that uses Win98, then the situation may not be the case. We often find that although the Ping command can pass, but still can't realize mutual visit in "Network Neighborhood", what should we do?
Countermeasure 1: Enable Guest users in Win2000/XP. After the Win2000/XP system is installed, there will be a lack of
to establish two user accounts, namely Administrator (System Administrator) and Guest (Guest Account). All users who are not assigned to the account on the local computer will use the Guest account by default. , the account has no password. However, by default, this Guest account is not enabled, we can get it from the Control Panel | Management tools| Computer management| Local users and groups| The user "find" the "Guest" account, and right-click with the mouse to open the "Guest Properties" dialog box, remove the check mark on the "Account Disabled" checkbox here, so that you can access Win2000 from Win98 after exiting. /XP.
In fact, after enabling the Guest account, the biggest advantage is that you do not need to enter the username and password when accessing Win2000/XP from Win98. This method is more suitable for users with uncertain and large traffic. LAN, but not for home users.
Countermeasure 2: Check if there is a security policy restriction in Win2000/XP. Sometimes, Win2000/XP is "smart" too, although we have enabled the Guest account, from Win98 still can't access Win2000/XP, then it is from "Control Panel" Management tools| Local security policy| Local strategy| The user rights assignment "found in the network to access this computer" or "reject access to this computer from the network", and then check whether the Guest account or other corresponding account appears, and then add or delete according to different situations.
Countermeasure 3: Disable the firewall on the local connection. The firewall is a security system that acts as a security boundary between the network and the outside world. Microsoft provides users with a built-in Internet Connection Firewall (ICF) in WinXP. Some unsafe information can be restricted from entering the internal network from the outside. However, if you enable this firewall on the local connection, it will cause the workgroups to be unable to visit each other, "XXX cannot be accessed", "You may not have Permission to use network resources ", please contact the administrator of this server to find out if you have access rights", "can not find the network path" and other similar prompts, please disable the firewall shield of the local connection. Br> Countermeasure 4: Add NetBEUI protocol for WinXP. In fact, directly add NetBEUI protocol to solve the problem of not being able to visit each other. Sometimes it is simpler, and it can solve the above-mentioned problem of enabling the firewall. The WinBE installation will automatically install the NetBEUI protocol, but since WinXP no longer provides technical support for the NetBEUI protocol, it can only be added manually.
Find the WinXP installation CD and enter the "valueaddMsftNetNetbeui" folder. There are 3 files in Nbf.sys, Netbeui.txt and Netnbf.inf. Copy the Nbf.sys file to the "WindowsSystem32Drivers" file of this machine first. Under the folder (the machine here refers to the computer with WinXP installed), and then copy the Netnbf.inf file to the "WindowsINF" folder of the machine, the Netbeui.txt file is optional. However, the INF folder has Hidden properties, users need to first "tools" under WinXP The directory is selected in the Properties window to see the directory.
Countermeasure 5: Enable "File and Printer Sharing" in Win98. This is a very simple but often overlooked problem, that is, with Win2000/Although XP machines can find Win98 machines from "My Network Places", they cannot be accessed. This is because Win98 does not enable "Allow other users to access my files". This option can be used to solve this problem. .