Skipping bad block at ****

  
 

This kind of appearance appears: look at other people's posts to do it: nand scrub


Save. First with nand scrub the full chip erase again just fine.

After nand scrub problem has been solved, thanks ha

What nand scrub is?

forced to erase, no matter good block bad block

The pair Is Nand damaged?

Reducing the life of the Nand block once.

The NAND will identify the bad blocks before leaving the factory. The nand scrub command will erase these marks, which will cause the bad blocks to be used as good blocks. This is not safe. However, as a development board, it was originally used to solve problems, make mistakes, and solve errors. I often use nand scrub.


Skipping bad block at 0x011a0000Skipping bad block at 0x011c0000Skipping bad block at 0x011e0000Skipping bad block at 0x01200000Skipping bad block at 0x01220000Skipping bad block at 0x01240000Skipping bad block at 0x01260000Skipping bad block at 0x01280000Skipping bad block at 0x012a0000Skipping bad block at 0x012c0000Skipping bad block at 0x012e0000Skipping bad block at 0x01300000Skipping bad block at 0x01320000Skipping bad block at 0x01340000Skipping bad block at 0x01360000Skipping bad block at 0x01380000

^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^

Copyright © Windows knowledge All Rights Reserved