How to remove WiFi barriers and enhance WiFi signals

In a home wireless network, the transmission distance of Wi-Fi is an important factor affecting the wireless rate. The following system home Xiaobian will tell you how to remove the WiFi barrier and enhance the WiFi signal. Solve the problem of weak WiFi signal. An important reason for affecting the transmission distance is that there are too many obstacles in the room. Therefore, in the process of placing the wireless router, in addition to placing the router in the center of wireless activity, it provides an optimal wireless for wireless applications. Outside the coverage, you should also try to avoid objects that are most obstructive to wireless signals, such as concrete floors, load-bearing walls, etc., to reduce the attenuation of the signal. In addition, too many surrounding wireless signal sources are also an important factor in the attenuation of Wi-Fi signals, especially when adjacent channels occur, the interference of wireless signals can be severe. At this time, we can solve it by changing the wireless channel. First, look at the channel occupancy of the surrounding network. After downloading and installing, run inSSIDer (download address: http://www.onlinedown.net/soft/79559.htm), and switch to the “NETWORKS” label in the main interface. In the list, we can see To all the Wi-Fi networks we are currently using and surrounding, where the “CHANNEL” column displays the channels currently occupied by these networks (Figure 1). Check to see if these channels have their own The Wi-Fi network is the same or adjacent (the signal of one channel will interfere with the two channels adjacent to it at the same time, that is, the signal of channel 6 will affect channel 5 and channel 7), if any, it can enter the router setting interface to Change to other. Take the TL-WR740N router as an example. Enter http://192.168.1.1 in the address bar of the browser and press Enter. Enter the username and password in the interface that appears (the default is Admin) and click the “Confirm" button (Figure 2). Enter the router settings interface. Select the “Wireless Settings & Rarr; Basic Settings” item on the left, then on the right side, click the drop-down arrow in the “Channels” section to set the channel to Other, click the “Save” button, and finally Then select "System Tools & Rarr; Restart Router" on the left side, restart the router to make the settings take effect (Figure 3). Where can the wireless router be placed without dead ends: www.xp85.com/html/article-98-2107.html Tip: For those who have routers that support both 2.4GB and 5GB dual channels, because of the application in the 5GHz band Level wireless devices are not rich, so they only need to switch the router to the 5GHz band to use, which can avoid most of the surrounding network devices and significantly increase the Wi-Fi rate.