Installation/Upgrade Win10 9879 Preview Hard Disk is broken?

First of all, please keep calm, a software level system is almost impossible to physically damage the hard disk, so your hard disk should be no physical damage, your data still exists in On the hard disk

Now that you know that there are more problems with the mechanical hard disk, it seems that only Chinese users have problems, Google, MDL, Microsoft community have not reported

For better and faster Solve the problem, retain the data to the maximum extent, please do not make meaningless operations on the failed hard disk, which may worsen the worse, and eventually get your data overwritten

1. Try to install Intel RST driver < Br>

2. Try to restore the BIOS factory settings

3. Uninstall HFS+, Macdrive and other hard disk recognition software

4. Turn off the quick start

5. Use chameleon, Clover boot Win10

6. Use PE to view the hard disk and then install the low-level system

7. Turn off UEFI (BIOS) boot

8. Skip hard disk self-test startup

Now I list the following situation

1. There is a problem with direct upgrade installation

2. There is a problem with formatting installation {Use other tools Format the hard disk}{Format the hard disk using the installer}

3. Hard disk failure

1> The hard disk cannot be detected in the system. Please remove the hard disk and replace the computer to see if it can be recognized. If you can, right-click this computer--management--device manager to check if there is a hard disk. If not, please enter the computer BIOS to check if the hard disk is detected

2> There is no hard disk in this computer. However, the device manager can detect the hard disk, but there is an unallocated partition. Please download DiskGenius to search for the missing partition table, and then save it to restore

3> The performance is not recognized by other computers, and there is no BIOS. Please unplug the hard disk first, do not operate for the time being, wait for processing