How to deal with the "Unable to start the bearer network" error when Win10 is enabled for WiFi

  

Under Win10, you can use the command prompt to enable WiFi and set the notebook as a WiFi hotspot. In the process, sometimes there will be some problems. For example, when the WiFi is activated, the prompt fails to start the bearer network, and the WiFi connection fails. How to deal with this problem?

The reference method is as follows:

1. Right click on this computer (or this computer/computer) — Manage — Device Manager, then click View above, check “ Show hidden devices & rdquo; and then find the Microsoft Managed Network Virtual Adapter under the network adapter.

2. Enable the adapter and then configure the virtual WiFi hotspot. If the WiFi hotspot is displayed after the configuration is completed, but the network cannot be connected, please try to update the driver of the wireless network card.

If you want to open the WiFi hotspot, you need to start the NIC driver related to this service. If it is not enabled, you will get the error of "Unable to start the bearer network".

Copyright © Windows knowledge All Rights Reserved