Win7 system open blue screen code 0x00000f4 how to do?

When I open the win7 computer in the morning, the computer will have a blue screen (as shown below), and the blue screen code 0x00000f4 will be displayed. After that, the computer will restart automatically. What should I do with the blue screen code 0x00000f4?

Edit answer: Blue screen Code 0x00000F4 may mean that the hardware has failed, which may be caused by a failed hard disk or memory. However, it cannot be absolutely certain, because there are a few cases that are caused by other reasons, so it is recommended to eliminate and solve the problem through the following steps.
It is recommended that you exclude the steps: (soft and hard steps first)
1. If running the software causes an error, it is recommended to reinstall the software to confirm the problem. If the software is not compatible with the system, you may need to uninstall and replace the operation. .
2 Whether there are other software running at the same time causing conflicts or the host configuration memory is too small, causing memory overflow or exhaustion (try to increase the memory confirmation problem).
3. Check whether the driver or BIOS has been reinstalled or upgraded recently. It is likely that the driver is incompatible. Uninstall the original driver. (especially graphics card, motherboard driver)
4. If the first three points are excluded, it is likely to be a hardware problem. To determine if it is a hardware failure, it is recommended to format the hard disk, reinstall the system, see if it is normal, eliminate viruses and system related faults.
5. Hardware problems, mainly check the hard disk and memory, check whether the memory metal strip is oxidized, if more than two memory is installed, remove one or change the memory slot. Other motherboards, power supplies, heat sinks, etc. should also be checked.