Win7 system installation tutorial

Recently read a lot of articles about installing windows7, what windows 7 ghost version, pure version, what, after reading, I can only say to those who do ghosts, I am abandoning ghost, why should I give up for this Microsoft company? The maintenance and update of Windows XP shows that the requirements of the times are changing. The Ghost technology based on XP has also lagged behind the times. For those who use Ghost to cover the C drive to reach the update from XP to Win 7, Win 8, this is only achieved. The basic kernel and basic operations of Win 7, Win8 system, XP and Windows 7 boot manager has undergone a fundamental change, so Ghost only covers the basic kernel, rather than fundamentally upgraded the new system.

This article is for everyone to popularize the correct installation of windows 7, here we leave the outdated NT5 system (such as XP) and unpopular NT6.0 (such as Vista) do not talk, you will see Windows 7 (Windows 8 based on the Windows 7 installation concept is not the same as the installation method). Since you choose to install the system yourself, then please learn the attitude of learning some real technology instead of coveting the pseudoscience. The old concept is not allowed, and upgrading to a new system is also a loss. Pseudoscience may bring you temporary convenience but will eventually become a stumbling block for further study. If you just want to achieve the current small goals faster, then you don't need to continue to look down. Searching for a lot of content with your favorite search software may be more suitable for you. I believe that everyone loves science and I will provide you with the correct guidance possible.

You can go to Microsoft officially to download the Windows 7 Microsoft original unmodified system image, and then directly copy the above address to Thunder and other download tools to download. I don't advocate the use of third-party modified systems (such as the common rainforest, depth, computer companies, etc.), nor does it advocate the use of various Ghost version systems or class-like images with rogue software.

Preparation before installation

First we need to determine the system we want to install. It is divided into 32-bit and 64-bit versions. If your memory exceeds 4GB, be sure to install the 64-bit version. Please do not use the 32-bit version for "memory cracking", which will seriously affect the stability of your machine. If your memory is just 4GB, then no matter which version is different. But if you are just getting ready to upgrade from XP to Windows 7 or less than 4GB of memory, then I suggest you choose the 32-bit version here. As for the choice of Basic, Home Basic, Home Premium, Professional, Enterprise and Ultimate, you can consider it at your own discretion. But no matter which version you choose, there is no difference in compatibility, stability, and resource consumption. If you don't have a suggestion, you can choose the flagship directly.

After you have selected the system you need to download, in order to make the hardware of the machine work properly, you must prepare the driver for your machine (also must correspond to the system and the number of bits). If you don't have a driver, you may experience situations where the monitor cannot adjust to the optimal resolution, cannot play games, cannot access the Internet, and cannot recognize your peripherals. These drivers can be searched and downloaded by your own hardware. Most notebooks will also be equipped with a driver CD or a driver download on the brand's official website. Or you can choose to prepare tools such as “Driver Wizard” and “Drive Life” with the universal network card driver. As long as the network card works normally, the rest of the drivers can be downloaded by tools (but this is not possible for you). It is recommended when finding the best driver for you).

The most basic installation method

When we downloaded the system file, the first step we need to do is to extract it using the decompression software (note that it is extracted somewhere, not Open it directly. If your decompression software can't extract the iso file, please upgrade the software version. At the same time, we don't advocate using the virtual CD-ROM to operate, let alone run to the third-party PE. We don't need third-party PE at all. Please discard your mistakes.) After decompression, we can get some files with the structure shown in the figure (different systems, different numbers of files will be different).

Click setup (recommended to turn off the security software before you operate), you will see the wizard appear, we will use the picture to explain directly below.

Wait a little longer.

No matter what you choose, there is almost no impact on the installation.

Be sure to accept the license terms!

Usually we don't use it here (more often it is not available) “Upgrade”.

Come to the interface of the selected partition, you can't and don't need to format the disk at this time.

If you are installing to the system disk, the following prompt will pop up.

There is nothing wrong with coming here.

This is the most basic installation method, then skip to the subsequent operations section.

How to boot from media

Tip: If you have used the above method, proceed to the next step, this is another method.

Scope:

It has nothing to do with the existing operating system of the target computer. It can be used on any existing system (including Linux, Dos) or even no system after the media is produced under the mainstream Windows system. The host is installed.

If you have a blank disc and a burner on hand, you can burn the downloaded ISO image onto a disc to complete the media creation. If not, we can have a USB flash drive to replace the role of the CD.

Creating a bootable USB flash drive We recommend that you use the UltraISO software to operate (paid software, but you can try it out, there are also a lot of cracked versions on the Internet, but you are recommended to support genuine, the price is very low). We also do not recommend the use of Microsoft's official production tools, and it is not recommended to use third-party tools such as "Magic Cube" to prove that UltraISO is the most reliable. Once again, we strongly resist such tools as “old peaches”, “Chinese cabbage”, “computer store”, “U master” and so on. Please netizens to abandon the dross and return to science!

After installing UltraISO, use this software to open the ISO image that we downloaded before. (If you make a boot disk under Win7 or Win8, it is recommended that you right click on UltraISO to run as an administrator).

We can probably see a structure similar to the one below.

Insert your USB stick and click on the write hard drive image in the boot.

It is recommended that you write directly in the default configuration (Note: This will format your USB flash drive, please make a backup in advance.

After the progress bar is finished, a boot USB flash drive is completed. Now, you can get the U disk from the computer you need to install the system.

Most computers now have a quick boot menu. After turning on the power, press the keyboard quickly to enter the menu (different machines) The shortcut keys are different, mainly concentrated in F12, ESC, etc., please try or observe the boot prompt), identify your U disk name selection to boot from the U disk.

You will probably see it when you start it. The following interface.

Here we enter the official PE (pre-original environment), first select the language related settings.

There are two ways to choose from, the installation system chooses now Installation, and repairing the computer is to repair the system in case of failure.

The next few steps are the same as installing under normal system. The difference is that we can now use the drive option to partition the hard disk. Operation. The subsequent steps are consistent.< Br>

Please partition according to your own needs, or you can not directly operate the next step (please do not consider the 4K alignment problem, use the original PE partition itself is).

When the computer is first time Please remove the boot media after rebooting to avoid loop installation.

Please skip to the subsequent operations section.

Follow-up operations

Regardless of the method you used to install, The final follow-up actions are the same. Please choose one way to install and then proceed with the subsequent operation process.

If all goes well, after several restarts you will see the following screen. First, you can Customize a user name, it is recommended to use English.

Set your password, leave it blank.

Depending on the version, you may be asked to enter a key, you can click directly Skip.

(not shown here)

Then select the settings according to your needs.

Select the time zone.

You may also watch To the picture below, please choose according to the actual situation, you can not choose Choose a public network.

There will be only one recycle bin on the newly installed system desktop, you can set it according to your preferences (Note: Office and system are sold separately, if you need to install it again, it is recommended to use Office 2010 The above version).

If your original system is not formatted, you can now clean up old system files by disk cleaning (you cannot delete old system files directly, which will cause unavoidable losses).

Right-click C drive, properties, disk cleanup.

Click to clean up the system files.

Check the files you want to delete and click OK.

Next we want All we do is install the driver or driver tools we have prepared and the various runtimes. Since the process is too simple, we don't take a screenshot.