Win7 system blue screen error code 0*000000D1 analysis and solution

  
                                    

Win7 system has a blue screen error code 0*000000D1 What is going on? If you encounter this problem, don’t worry about your friends. Let’s take a look at how to operate with Xiaobian!

Blue screen error The code 0*000000D1 has the following three meanings:

(1) 0x000000D1RIVER_IRQL_NOT_LESS_OR_EQUAL;

(2)0× 000000D1 The transmitted signal is incorrect;

(3) 0×000004D1 The remote system does not support the transmission protocol;

Solution:

1. It should be checked whether the new hardware is plugged in. This problem that many people ignore will often lead to many inexplicable failures. If you have confirmed that there is no problem, first unplug it, then try another slot and install the latest driver;

2. If you see "acpi.sys" and the like in the blue screen If you name it, then you can definitely be a driver problem and a software problem;

3. If you just installed a new driver for a certain hardware, or installed a software, it is added to the system service. The corresponding project, on reboot or If you use the blue screen during the process, then enter the safe mode to delete it;

4, test the following memory for problems, enter the "failure recovery console", and then go to the virtual memory page file Pagefile. In the partition where sys is located, execute the "del pagefile.sys" command, then delete the page file, and then execute the "chkdsk /r" command in the partition where the page file is located, and then reset the virtual memory after entering Windows.

5, the last time the correct configuration, in general, the blue screen appears in the update of the hardware driver or new hardware and install its driver, then you can first provide the system by the "last configuration" ” Start the computer and try to solve the problem.

6. In the end, you can only reinstall the system.

Through the introduction of several solutions to the blue screen, I believe that many users have a certain understanding of the blue screen 0*000000D1, and hope that the blue screen to solve the problem can help you solve the problem effectively.


Article from http://www.windows7en.com/Win7/19203.html

Copyright © Windows knowledge All Rights Reserved