What if the Win7 computer headset has no sound?

  

The headset is plugged into the computer and found no sound. This is very inconvenient for us to use our computer to listen to music and watch videos. After all, the headphones are small and easy to use. Recently, users of the Win7 system, when using a computer to watch video, the headset was inserted into the computer and found no sound, and thought that the sound was too small, and later found that the sound is not too small. How do you solve such a problem? Now Xiaobian will tell you about the solution to the sound of Win7 computer headphones.

The specific steps are as follows:

The first step is to eliminate the headset failure, two methods. The first is to use the headset on other devices (other computers or MP3s). If the headset is normal, the problem is with the computer. The second type uses other normal headphones to try on the computer, and also determines if the problem is on the computer.

The second step is to determine the driver installation (hardware use requires driver support, although the sound card driver is usually installed, but to eliminate the problem or carefully excluded) run the software such as driver wizard or security software driver Detection function. If the driver is not installed, install the update driver. If it is already installed, go to the next step.

Step 3 Click on the Control Panel to enter the Window Device Manager and select Sound and Volume Management in the Device Manager (by the way, check if mute is turned on or the volume is too small).

Step 4 Click on the headset device to view the device properties and see if the device is disabled. If the device is disabled, select Enable it.

Step 5: The problem is detected here may be a problem with the socket. Look at the headset properties to see if the headset is plugged in. If not, the headset is not connected. Try turning the headset plug slowly to see if there is any sound. If there is no, there may be a broken socket. It is recommended to overhaul it.

The above is a common method for notebooks. There is another way for desktops: the desktop has two front and rear headphone jacks. After troubleshooting according to the previous method, try to replace the front socket. If there is sound, it may be that the previous one is broken, or it is disabled. If it is disabled, it is still enabled in device management (or audio-driven device management).

The solution for the Win7 computer headset has no sound, so I will introduce it to you in detail. If you have any problems with the above problems, then you may wish to try the above methods, maybe it will help you. Ah!

Copyright © Windows knowledge All Rights Reserved