Hard disk plugged into the computer did not respond

  

The hard disk is not connected to the computer



Is it a mobile hard disk? Some need to reinstall the driver. Open the device manager to see if there is a sign with an exclamation mark in front of the hardware. That means the driver is not installed, you need to uninstall the hardware, the automatic installation may not find the driver, install a Lu master or driver wizard software to install the driver, try again.






Mainly check if the power
line is connected.





Installing a hard disk in a shutdown state






Some drivers need to be installed < Br>





Replug the hard disk interface and try to check the hard disk power supply. If the power supply is broken, you will not see the hard disk.


< Br>

Try to plug in another computer, if there is no response, the hard disk is broken





It may be hard disk problem to find a U disk to do a PE program into the BIOS settings first boot U disk into the system after scanning the hard disk try





Estimated to be broken

< Br>


Make sure your hard drive is good, then make sure that the SATA port on your motherboard
is not good, and finally see if there is any problem with the hard drive cable






There may be problems with the interface



Copyright © Windows knowledge All Rights Reserved