What should I do if Win7 needs to press F2?

There are always various problems when the computer is used for a long time. The most common one is the boot problem. Many users report that the Win7 system needs to be started by pressing F2. What should I do if I encounter this problem? If you don't understand, let's take a look at the Win7 system compiled by Xiaobian. Press F2 to solve the problem!

When the computer is turned on, it stays on the boot screen and displays the following English prompts:

Press F2 to continue, DEL to enter SETUP

Translate to Chinese means: Press F2 to continue, press DEL to enter the setting interface. (Some motherboards may prompt to press F1 to continue)

Case 1: The computer does not have a floppy drive or floppy drive failure

1. The computer does not have a floppy drive or floppy drive failure, but it is set in the BIOS. Floppy drive, this situation will lead to F2 prompts.

2. In most cases, you only need to restore the BIOS default settings to restore normal.

3, some older motherboard default settings will also open the floppy drive, then enter the BIOS, please select the first "Standard CMOS Features".

4. After entering, set “Drive A” to “None”,“Floppy 3 Mode Support” set to “Disable”.

5, return to the BIOS settings main interface, select "Advanced BIOS Features" settings, press the Enter key to enter.

6. Set "Boot Up Floppy Seek" to "Disabled".

7. Press F10 to save, ESC key to exit BIOS setup, restart the computer.

Case 2: The motherboard battery has no power.

1. There is a button battery on the motherboard to keep the BIOS settings and continue to run the motherboard clock if there is no power on. This button battery can be used without electricity. At this time, you first need to disconnect the power cable of the computer host and open the computer case.