Win7 system computer when the U disk format operation prompts "windows can not complete formatting" solution

  

win7 system computer prompts U disk formatting operation "windows can not complete formatting" solution. U disk devices are often used by people to store, copy, and transfer data. U disk devices will also encounter various strange problems during use. For example, a user recently said that when the Ghost win7 system computer formatted the U disk, it prompts "Windows cannot complete the formatting". This problem occurs. How to solve it? Next, Xiaobian and everyone share specific solutions. Users who have encountered this problem will take a look at the following steps.

Method 1:

1. For the first time, try to use the “360U disk identification” tool to detect the actual capacity of the USB disk, so as to select the appropriate “file system” during the format operation. ;Types of. When the U disk memory is larger than 1G and less than 4G, it is recommended to use the Fat32 format for formatting operations;

2. When performing a formatting operation on the U disk, the "Format removable disk" window pops up. In the middle, click the "Restore device defaults" button, and then click the "Start" button to try to format the U disk;

3. Select "Low-level format" & U disk. In the "Formatted Removable Disk" window that opens, uncheck the "Quick Format" item, and then click the "Start" button to try to format the USB drive;

4, right Click on “Removable Disk” and select “Attributes” from the pop-up menu. In the window that opens, switch to the "Tools" tab, click “Check the error to start detection  ;

5. In the pop-up window, make sure the first item is selected, then click &ldquo Start Repair & rdquo;;

Method 2:

1. Open the “Run” dialog box (press Win+R to open), enter “CMD” to enter the MSDOS interface. ;

2, then enter “format j: /fs:fat32” (where j represents the drive letter of the U disk) and press the Enter key to perform the U disk format operation;

3 When the prompt shown in the figure is displayed, it indicates that the disk has a bad face on the large panel, and the disk may be damaged.

4. When the above error occurs, the bad track of the large panel is generated. U disk available capacity is reduced, so you can only use the "Fat" file system to format the U disk;

5, if the U disk has fewer bad sectors, and the available capacity is greater than 512M, you can use mass production Tools to repair the USB drive.

On the win7 system computer when the U disk format operation prompts "windows can not complete the formatting" problem, refer to the above two methods to solve it.

Copyright © Windows knowledge All Rights Reserved