U disk transmission speed is slow How to do Win7 improve U disk read and write speed skills

Frequently, some netizens ask in the major IT forums, what should I do if the U disk transmission speed is slow? In fact, there are different solutions to this problem. In some very old computers, it was found that using a mobile phone to copy a computer in a computer is surprisingly slow. Finally, it was found that the computer did not open USB2.0. Please read: Equipment can improve the performance of the solution
. Although many computers today do not have such problems, sometimes they still feel that the U disk transmission speed is slow. So, is there any way to improve the read/write speed of the U disk? The following article will introduce you how to improve the speed of U disk read and write under Win7 system, interested friends may wish to learn.

If you find that the U disk transfer speed is surprisingly slow, then you should first think about whether to enable the USB high-speed transfer mode, or check if USB 2.0 is enabled. Now mainstream computers have adopted USB3.0. , generally USB3.0 transfer files can reach hundreds of megabits per second, the speed is very good, as shown below:

hot reading: USB3.0 knowledge literacy usb3.0 and 2.0 difference < Br>
USB3.0 has excellent transmission speed experience

Although most of the USB flash drives we use today are still USB2.0, the speed is not too slow, generally can reach ten or twenty A few megabits per second, the theoretical maximum is 60M/s. If the speed is too low, you should check the system or set the problem. Let's share with you how to improve the reading speed of the U disk under the current mainstream Win7 system. The method is as follows: 1. First insert the USB disk into the USB interface of the computer, then Click on the desktop and click “Computer” to enter the computer panel, then you can identify and display our available disk (U disk) below, as shown below:
Enter the computer to find the U disk

2 : Then we right-click on the removable disk (U disk), and then select "Attributes", as shown below:
Removable disk right-click select attribute

three: in the U disk properties dialog box, There will be a ChiBank SD/MM Reader USB Device, item, we click to select it, then click on the bottom of the "properties", as shown below:
enter the ChiBank SD /MM Reader USB Device properties

four: After that we will enter the ChiBank SD/MM Reader USB Device Properties dialog box, we will switch to the “Policy” tab, then select “Better Performance” below, then click on the bottom. "OK" can be, as shown below:
choose better performance

five: After we check the U disk is what format, generally U disk is generally FAT32 and NIFS partition format, which NIFS The partition format has better performance in Win7 system. If the U disk is not in NIFS format, it is recommended to format the U disk. When formatting, select NTFS format, as shown below:
Format the U disk partition to NIFS partition

Tip: Formatting the USB flash drive will erase the original data on all USB flash drives. If there are important files in the original USB flash drive, please copy them to the computer and then format them. Then copy them back.

Six: After the above steps are completed, we need to restart the computer. After that, we will find that the U disk transfer speed will be better than before. Although it does not guarantee a big upgrade, there will only be some performance improvement. If you want to experience higher speed U disk data transmission, then it is recommended that you buy a USB3.0 U disk and then support USB3.0 computer to have an excellent transmission speed experience. The basic ten G movie uses USB3.0 for about one minute. It can be transferred.

More Win7 Tips
Recommended>>.

>>.Win7Forgot Password How to Do Win7 Password Reset U Disk Production Method

>>. How to use u disk to install win7 u disk to install win7 system graphic tutorial