Windows 7 can't enter the system solution normally

        When using the computer, it is inevitable that the computer will not start properly. Generally, we will press F8 to enter the safe mode of the system and further set the computer. But if you can't enter the system by pressing the F8 button at this time, what should we do? The following small series teaches everyone how to get into the safe mode.

1. The specific problem is the following picture:

2. If there is something important in your computer, personal recommendation is to reinstall the system. How to reload it!

If you have a USB flash drive, or if you have a system disk 3, if it is a USB flash drive, you must set it on the biOS motherboard and set it as a USB flash drive. Command prompt tool under WinPE system; then enter the following DOS command at the position where the cursor is located (press the Enter key for each DOS command): 4. The command is: cd c:\\Windows\\system32

bcdedit /set {default} osdevice boot bcdedit /set {default} device boot bcdedit /set {default} detecthal 1 The effect is as follows: The above is about Win7 system can not get in, press F8 also no mode how to do, small Edited according to the above can enter the system.