Win8/win8.1 system to create a virtual network card method diagram tutorial

Win8 add virtual network card step

First enter the Win8 system press the shortcut key win+x to open the device manager, as shown below

After adding, you can see this virtual network card in the network connection.

Otherwise, the virtual network card cannot be seen. If the virtual network card is not added, the bearer network cannot be started. When you use the command, you will be prompted with the following error.

Once the addition is successful, you can start the hosting network.

The following IP settings are done automatically by the system and do not need to be manually. If it does not automatically set the IP address, it can also be set manually. However, devices connected to this wireless network will not be able to obtain an IP address automatically. Also need to fill in manually. At that time, the gateway has to fill in the IP address set by itself.

Ok, here is the operation of adding a virtual network card under the Win8 system.